Redcar and Cleveland · England
Bath re-enamelling & resurfacing in Redcar, Redcar and Cleveland
Our technicians come to Redcar for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that will not shift

About our bath re-enamelling in Redcar
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include several chips and rust patches and a roll-top that’s seen better days, in cast iron baths, Victorian roll-tops and basins & shower trays.
Every repair is covered by a one-year guarantee.

- Where
- Redcar (TS10, TS11)
- County
- Redcar and Cleveland
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Redcar
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Redcar as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
What a repair can’t fix
To be straight with you, there are a few things a repair won’t fix:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Signs you need bath re-enamelling in Redcar
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- A coating lifting around the plughole
- Wear marks under the taps
Questions to ask before booking
- How soon you can use it again
- What protection goes down before work starts
- Whether the colour is mixed to match
- Who turns up on the day
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. It usually takes a full day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
- Point us to the nearest place to park
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
Covering Redcar
Redcar is about 7 miles north-east of Middlesbrough, in Redcar and Cleveland. Jobs in Redcar are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We work in all 48 towns and villages in Redcar and Cleveland. We work right across the region, from Redcar to Newcastle upon Tyne (about 35 miles away).
All of TS10 and TS11 is within our area, from the main roads to the quietest streets. Local streets include Farndale Square, Maple Square and High Street, all of which we cover. Being close to the A174 and A1042, Redcar is easy for our technicians to reach. Close by, we cover Kirkleatham (1 mile south-west), Dormanstown (1 mile west), Coatham (1 mile north-west), Yearby (1 mile south) and Warrenby (2 miles north-west). Within a short drive, we also cover Guisborough (5 miles south), Eston (4 miles south-west), Grangetown (4 miles south-west), Skelton-in-Cleveland (4 miles south-east), Skelton (4 miles south-east) and Brotton (6 miles south-east). As one of the bigger places in Redcar and Cleveland, Redcar is somewhere we visit frequently.
What’s near Redcar
In Redcar, that means homes near Church of St Peter, Lakes Primary School and Rye Hills School and the streets around them. For rail, the closest station is Redcar East station, roughly 0.8 miles north-east. A little further out are Skelton Castle (4 miles south-east) and Zetland Lifeboat Museum and Redcar Heritage Centre (1.1 miles north). Open spaces near Redcar include Eston Nab and Coatham Marsh.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Why choose Surface Doctor in Redcar
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Most jobs done in one visit
- Same prices wherever you are
Read our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. We don’t charge extra for travel to Redcar. The price depends on:
- The size and number of damaged areas
- How easy the damage is to reach
- The material
- What kind of damage it is
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Natural light rather than flash
- A coin beside the damage so we can judge size
- One picture of the entire bath
- A clear, close picture of the problem area
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Common questions in Redcar
How much does bath re-enamelling cost in Redcar?
Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do the materials smell?
There may be a mild smell during the work.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so let us know about it.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Never use suction bath mats
- Store bottles off the bath
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Places near Redcar
More services for Redcar
About our accreditations · Every repair comes with a one-year guarantee.

