Cumbria · England
Bath Re-enamelling for King's Meaburn homes
We travel to King's Meaburn for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Worn patches where water runs and sits
About our bath re-enamelling in King's Meaburn
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. Common call-outs are for a period or roll-top bath worth keeping and an old resurfacing that’s failing, on basins & shower trays, cast iron baths and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- King's Meaburn (CA10)
- Region
- Cumbria
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for King's Meaburn. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Most jobs done in one visit
- We will tell you if it’s not worth repairing
See our pricing and bath cost comparison.
Also near King's Meaburn
More services for King's Meaburn
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Where we work around King's Meaburn
King's Meaburn is about 9 miles south-east of Penrith, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. King's Meaburn is one of 438 places in Cumbria we cover. You can also see our page for Newcastle upon Tyne, about 47 miles away.
Jobs in CA10 are booked in the same way as anywhere else. We also travel to Morland (1 mile north-west), Bolton (2 miles north-east), Crackenthorpe (3 miles east), Kirkby Thore (3 miles north) and Long Marton (3 miles north-east). Within a short drive, we also cover Penrith (9 miles north-west), Appleby-in-Westmorland (4 miles east), Fair Hill (9 miles north-west), Carleton (8 miles north-west), Kirkby Stephen (12 miles south-east) and Bongate (4 miles east).
Landmarks near King's Meaburn
Our customers here include homes close to The White Horse Inn and the streets around them. The closest station to King's Meaburn is Appleby station, about 4.1 miles east of the centre. Other landmarks nearby include Appleby Castle (4.1 miles east) and North Westmorland Rural District (2.8 miles east).
FAQs for King's Meaburn
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
For landlords and businesses
If you manage property in King's Meaburn, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath re-enamelling in King's Meaburn?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Signs it’s time to call us include:
- An outdated colour you’d like to change
- Stains that won’t shift
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
Comparing quotes
- How the room is protected while they work
- Whether the price covers travel
- What aftercare is recommended
- What happens if the damage is worse than the photos show
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. What matters most is:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The material and finish
- Doing more than one item at once
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed quote
You can usually get a fixed price without us visiting. To help us price it:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Natural light rather than flash
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
What we cannot put right
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- A bath that is rusted through
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
Send us photos and we will tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
