Pembrokeshire · Wales

Bath re-enamelling & resurfacing in Kingsbridge, Pembrokeshire

Problem with your bath in Kingsbridge? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • Several chips and rust patches
  • A bath that stays dull however much you clean it
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Kingsbridge

Kingsbridge and nearby

Kingsbridge is about 1 mile east of Pembroke, in Pembrokeshire. Whether you’re in the middle of Kingsbridge or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Kingsbridge is one of 223 towns and villages in Pembrokeshire where we work.

Every address in SA71 and SA72 is covered, from the main roads to the quietest streets. That includes homes on First Lane, Golden Lane and Main Street. Main roads around Kingsbridge include the A4075 and A4139, so getting to you is simple. Neighbouring places we cover include Merlin's Cross (1 mile south), Pembroke (1 mile west), Golden Hill (1 mile north-west), Green (1 mile north-west) and Monkton (1 mile west). Further out, we also cover Haverfordwest (9 miles north), Milford Haven (6 miles north-west), The Marsh (9 miles north), Dinbych-y-Pysgod (8 miles east), The Green (8 miles east) and Pill (6 miles north-west).

What’s near Kingsbridge

In Kingsbridge, that means homes near Eastgate Hotel, Ysgol Harri Tudur/Henry Tudor School and Church of Saint Michael, among other places. There is a railway station in Kingsbridge itself: Pembroke station. Further afield, we also cover the area around Pembroke Castle (0.8 miles west) and Pembroke: St Mary South (0.8 miles west). For a walk, there is Pembroke River upper and Golden Hill.

Map of Kingsbridge © OpenStreetMap contributors

Bath re-enamelling at your home in Kingsbridge

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s a peeling or bubbling previous coating and lots of chips and rust spots, we can help, on cast iron baths, pressed steel baths and Victorian roll-tops alike.

A one-year guarantee comes as standard, so you’re covered after the visit.

Location
Kingsbridge (SA71, SA72)
Area hub
Pembrokeshire
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Kingsbridge: your questions answered

How long will the bath be out of use?

Most baths are done in a day, ready the next day. We will confirm timings when we quote.

Will the new finish last?

Look after it and it lasts. Gentle cleaning, no suction mats.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Pembrokeshire.

What does bath re-enamelling cost?

Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

When a repair is not the answer

A repair is not right for every job, including:

  • A bath that’s rusted through
  • Damage hidden under a previous coating, until it’s stripped back
  • An acrylic bath that flexes badly underfoot

Send us pictures and we’ll tell you honestly.

Surfaces we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

How the visit works

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. The room is masked, protected and ventilated.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We prepare the surface and apply a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can generally be used the following day.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on
  • Have a window or extractor fan available

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send photos for a quote

Related advice

When to call us in Kingsbridge

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

Customers generally contact us about:

  • A period or roll-top bath worth keeping
  • Staining under the taps and around the waste
  • Wear marks under the taps
  • A coloured bath you want in white

Questions to ask before you book

  • How to look after the finish
  • Is the price fixed, and does it include VAT?
  • Whether they match the colour on site
  • How long the guarantee is and what it covers

Choosing a repair company

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Landlords, agents and businesses in Kingsbridge

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Repairing versus replacing in Kingsbridge

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.

Why Kingsbridge clients choose us

  • One price list for the whole UK
  • A year’s guarantee on all work
  • We leave the room as we found it
  • A fixed quote before booking

Read our pricing or resurfacing vs replacement cost guide.

How to care for the repair

Once the work has cured, treat it gently:

  • Clean with a soft cloth and mild detergent
  • Do not let dyes or oils sit on the finish
  • Repair dripping taps early
  • Store bottles off the bath

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.