Greater London · England
Bath re-enamelling & resurfacing in Kingsland, Greater London
We travel to Kingsland for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- An old resurfacing that’s failing
About Kingsland
Kingsland is about 1 mile north-east of Hoxton, in Greater London. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 764 places across Greater London, from the larger towns to small villages.
We work across N1, E8 and N16 and the streets around it. Local streets include Dove Road, Glebe Road and Ufton Road, all of which we cover. If you are just outside Kingsland, we cover De Beauvoir Town (1 mile south-west), Dalston (1 mile east), Mildmay (1 mile north-west), Canonbury (1 mile west) and Newington Green (1 mile north-west). Further out, we also cover London (3 miles south), City of Westminster (4 miles south-west), Marylebone (4 miles south-west), Kensington (6 miles south-west), Walthamstow (4 miles north-east) and Hampstead (5 miles west).
Near you in Kingsland
We visit homes around The Prince of Wales pub, Shoreditch Park and Holy Trinity Church of England Primary School and the streets around them. Also close by are Bishopsgate Institute Special Collections and Archives (1.8 miles south), Kingsland Secondary School (0.5 miles north-east), Hackney New School (under half a mile south) and Holy Trinity Church (under half a mile east). There is a railway station in Kingsland itself: Dalston Junction station. Well-known places in the area include Metropolitan Free Hospital (less than half a mile south) and Clowns Gallery-Museum (within half a mile east). Not far away are St. James's Park Lake and Gillespie Park.
- Local facilities include Stoke Newington (0.8 miles north-west)
Bath re-enamelling in Kingsland without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We work on basins & shower trays, acrylic baths and cast iron baths, and people most often call us about stains that won’t shift and chips and rust in more than one place.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Where
- Kingsland (N1, E8, N16)
- Region
- Greater London
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Kingsland
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Kingsland as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Also near Kingsland
What else we do in Kingsland
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly before booking.
Materials we work on in Kingsland
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Kingsland questions
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Do you cover Kingsland?
Yes. We cover the entire UK and come to Kingsland and the rest of Greater London. Send pictures and we will quote, or call 0345 017 0787.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
How it works
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Point us to the nearest place to park
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
How to get a price
For a price in Kingsland, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Don’t leave a chip unrepaired
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Use washing-up liquid and a soft cloth
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Repair or replace in Kingsland?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- One-year guarantee on every repair
- We leave the room as we found it
- One price list for the whole UK
- Colour mixed on the day to match
See our pricing or bath cost comparison.
Do you need bath re-enamelling in Kingsland?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Customers usually contact us about:
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Comparing quotes
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- What the guarantee covers, and for how long
- What preparation is included
About our accreditations · Every repair comes with a one-year guarantee.
