Cambridgeshire · England
Bath re-enamelling & resurfacing in Kingston, Cambridgeshire
Damaged bath in Kingston? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An old resurfacing that is failing
- Staining under the taps and around the waste
About our bath re-enamelling in Kingston
We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the following day. We regularly repair acrylic baths, Victorian roll-tops and pressed steel baths, and people most often call us about a period or roll-top bath worth keeping and an outdated colour you’d like to change.
Big or small, you get the same one-year guarantee.
- Area
- Kingston (CB23)
- Region
- Cambridgeshire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- The type of damage
- How much damage there is
- Access to the area
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- A coin beside the damage so we can judge size
- The material, if you know it
- Details of any past repairs
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
About Kingston
Kingston is about 7 miles west of Cambridge, in Cambridgeshire. Across the CB23 area, we come to you. Kingston is one of 371 places in Cambridgeshire where we work. You can also see our page for London, about 47 miles away.
All of CB23 is within our area. Whether you live on The Green, Bourn Road and Crane's Lane or anywhere nearby, we can come to you. Other places close to Kingston include Toft (1 mile north-east), Caldecote (1 mile north), Great Eversden (2 miles south-east), Bourn (2 miles north-west) and Crow End (2 miles north-west). Larger places within reach include Cambridge (7 miles east), St Neots (10 miles west), Huntingdon (13 miles north-west), St Ives (11 miles north), Royston (9 miles south) and Cambourne (3 miles north-west).
Near you in Kingston
Around Kingston, we work in homes near United Reformed Church, Kingston and Bourn Old Railway and Comberton Village College and the streets around them. Nearby you’ll also find Orwell Toot Hill (3 miles south). Open spaces near Kingston include Hardwick Wood.
Your questions about bath re-enamelling in Kingston
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first, so let us know about it.
What we cannot put right
We will always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Kingston
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Landlords, agents and businesses in Kingston
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Kingston. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- We leave the room as we found it
- One visit for most repairs
- Nothing taken out or refitted
- Same prices wherever you are
Read our pricing or bath cost comparison.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs immediately
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Places near Kingston
What else we do in Kingston
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
Ask for a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
