Kent · England
Bath re-enamelling & resurfacing in Kingston, Kent
Full bath re-enamelling and resurfacing at your home in Kingston, with a one-year guarantee on every repair.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that’s failing
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Straight answers about what a repair can do
- Nothing taken out or refitted
- Typically one visit, start to finish
- Colours mixed by hand to suit your surface
See our pricing and guide to resurfacing and replacement costs.
Bath re-enamelling in Kingston without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people get in touch are brown or grey marks that don’t clean off and wear marks under the taps.
Big or small, you get the same one-year guarantee in Kingston and across Kent.
- Area
- Kingston (CT4)
- County
- Kent
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a full day in most cases. We leave the room clean and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
How to get a price
Email us a photo of the damage and one of the whole item, with your CT4 postcode, and we’ll come back with a fixed quote.
Advice
How we price bath re-enamelling
Prices start from £350. There’s no area surcharge for Kingston. The price reflects:
- Whether we combine several jobs
- How many areas need work
- How hard the colour is to match
- What the surface is made of
Our prices are the same across the UK, so there’s no premium for Kingston. The job itself decides the price: how much damage, what it’s made of and how many items.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Aftercare tips
Nothing complicated is needed:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Have chips seen to early
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Places near Kingston
What else we do in Kingston
Where we work around Kingston
Kingston is about 5 miles south-east of Canterbury, in Kent. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Our repair technicians cover all 922 towns and villages across Kent, from the larger towns to small villages. Our jobs stretch from Kingston to London (57 miles away).
We cover every part of CT4 and the streets around it. Local streets include The Street, Church Lane and Covet Lane, all of which we cover. Other places close to Kingston include Out Elmstead (1 mile south-east), Barham (1 mile south-east), Marley (1 mile south-west), Bishopsbourne (1 mile north-west) and Derringstone (1 mile south). Further out, we also cover Ashford (13 miles south-west), Canterbury (5 miles north-west), Margate (15 miles north-east), Dover (9 miles south-east), Folkestone (9 miles south) and Ramsgate (14 miles north-east).
What’s near Kingston
Around Kingston, we work in homes near Barham Church of England Primary School, Black Robin Public House and Church of St Giles, among other places. The closest station to Kingston is Adisham station, roughly 2.7 miles north-east of the centre. A little further out are Kent and Canterbury Hospital (4.2 miles north-west).
Landlords, agents and businesses in Kingston
For anyone letting property in or around Kingston, we will quote for several properties at once. Just send pictures for each address and we will price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
When to call us in Kingston
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Common reasons people in Kingston contact us are:
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
- Lots of chips and rust spots
Comparing quotes
- What the guarantee covers, and for how long
- What preparation is included
- Aftercare advice
- Is the price fixed, and does it include VAT?
Questions from Kingston
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How much does bath re-enamelling cost in Kingston?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item with your CT4 postcode.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
How long is the bath unusable?
One day for most baths, ready the day after. We will confirm timings when we quote.
Do you cover the entire of Kent?
All of Kent, and the rest of the UK. There’s no extra charge for travel.
About our accreditations · Every repair comes with a one-year guarantee.
