Kent · England
Bath re-enamelling & resurfacing in Barham, Kent
Bath re-enamelling in and around Barham: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white
Barham: your questions answered
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Are there extra charges for Barham?
Travel is included in the price, with the same prices everywhere we work.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you cover Barham?
We do. Repair technicians travel to Barham from across the region, and the price is the same as everywhere else.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Bath re-enamelling in Barham, done in place
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. Whether it’s lots of chips and rust spots and worn patches where water runs and sits, we can normally put it right, whatever the material.
Big or small, you get the same one-year guarantee.
- Area
- Barham (CT4)
- County
- Kent
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath re-enamelling in Barham
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
People generally call us after spotting one of these:
- Several chips and rust patches
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- Stains that will not shift
What your quote should include
- How your room will be protected
- Who turns up on the day
- How the colour is matched
- If travel is included in the price
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- The size and number of damaged areas
- The colour and finish to match
- Any earlier repairs that need removing first
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- Something in shot to show the size
- A photo taken from further back
- Where you are, by postcode
- Daylight if possible, and no flash reflection
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Towns and villages near Barham
What else we do in Barham
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why choose Surface Doctor in Barham
- We leave the room as we found it
- One visit for most repairs
- Everything repaired in place
- Colours mixed by hand to suit your surface
Take a look at our pricing or bath cost comparison.
Barham and nearby
Barham is about 6 miles south-east of Canterbury, in Kent. Whether you are in the middle of Barham or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 922 towns and villages across Kent. We work right across the region, from Barham to London (about 58 miles away).
Postcode districts we cover here: CT4. We regularly work on streets such as The Street, Valley Road and Church Lane. Neighbouring places we cover include Derringstone (1 mile south), Gravel Castle (1 mile south-east), Heart's Delight (1 mile south-west), Out Elmstead (1 mile north) and Kingston (1 mile north-west). Further out, we also cover Ashford (13 miles west), Canterbury (6 miles north-west), Margate (15 miles north-east), Dover (8 miles south-east), Folkestone (8 miles south) and Ramsgate (14 miles north-east).
What’s near Barham
Locally, our jobs take us to homes close to Church of St John the Baptist, Jumping Downs and Barham Church of England Primary School and the streets around them. The closest station to Barham is Snowdown station, roughly 2.4 miles east of the centre. A little further out are Kent and Canterbury Hospital (5.1 miles north-west).
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse off hair dye, oils and bath bombs immediately
- Avoid suction-cup mats
- Respect the curing time we give you
- Get any chip repaired quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
What a repair can’t fix
We won’t take on work that will not last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
