Surrey · England

Bath & shower resealing (mastic) in Kingswood, Surrey

Bath resealing across Kingswood and nearby, done in a single visit in most cases and guaranteed for a year.

  • Gaps in the seal
  • Black mould in the sealant
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Kingswood

About our bath resealing in Kingswood

Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and a new seal stops it. We’re often asked to fix gaps in the seal and missing sealant behind the taps, in shower trays & enclosures, baths and wet rooms.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Where
Kingswood (KT20)
Area hub
Surrey
Guarantee
A year, on every repair
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Is resealing worth it?

Resealing is routine maintenance. Putting off a reseal can let water reach the walls and floor, and that damage costs much more to fix. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why Kingswood clients choose us

  • Everything repaired in place
  • Honest advice, even when it means no job
  • One price list for the whole UK
  • One-year guarantee on every repair

Take a look at our prices page.

Signs you need bath resealing in Kingswood

In time, even good sealant discolours. Steam, soap and movement all wear it down.

Most people contact us after spotting one of these:

  • Leaks at the edges
  • Missing sealant behind the taps
  • Black mould in the sealant
  • Old sealant that looks dirty

What to look for in a quote

  • Who will actually do the work
  • Whether the colour is mixed to match
  • How your room will be protected
  • Aftercare advice

10 questions to ask before you book

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Baths

We fill the bath before sealing, so the joint is at its widest.

Questions from Kingswood

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Can I get a quote without a visit?

Nearly always. If photos don’t show enough, we will ask for another angle.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Why does the silicone keep cracking?

The bath or tray is probably flexing. If it keeps happening, the support may need fixing.

Will there be a smell?

There can be some smell while we work. It fades as everything cures.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Do you work in Kingswood?

Yes. We work across the UK and travel to Kingswood and the rest of Surrey. Send us photos for a fixed quote, or call 0345 017 0787.

Prices and what affects them

Quotes are free and the price is fixed. What we take into account:

  • The colour and finish to match
  • Whether old repairs or coatings need taking off
  • The type of damage
  • How easy the damage is to reach

Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

How to get a fixed price

We price nearly every job from photos. This is what we need:

  • Where you are, by postcode
  • Any earlier repairs or coatings
  • A coin beside the damage so we can judge size
  • A photo taken from further back

Upload a photo of the damage and a wider shot of the entire item, and tell us you are in Kingswood, and we’ll reply with a fixed quote.

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Store bottles on a shelf
  • Clean the joints with a mild cleaner
  • Wipe the joints dry after use
  • Use the extractor fan

Leave the sealant to cure for the time we give you, normally about a day.

Don’t wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Kingswood and the surrounding area

Kingswood is about 4 miles south-west of Coulsdon, in Surrey. Anywhere in KT20, we come to you. We work in 395 places across Surrey, from the larger towns to small villages. Our jobs stretch from Kingswood to London (about 15 miles away).

We cover every part of KT20 and the streets around it. Jobs here include addresses on Beech Drive, Bears Den and Hamilton Place. With the B2032 close by, Kingswood is simple for us to get to. Neighbouring places we cover include Tadworth (1 mile north-west), Lower Kingswood (1 mile south), Walton on the Hill (2 miles south-west), Margery (2 miles south) and Mogador (2 miles south). Within a short drive, we also cover Epsom (4 miles north-west), Horley (8 miles south), Redhill (4 miles south-east), Ewell (5 miles north-west), Reigate (4 miles south) and Walton-on-Thames (11 miles north-west).

Around Kingswood

In Kingswood, that means homes near Eyhurst Park, Tadworth Primary School and Kingswood Arms, among other places. Also close by are Chinthurst School (1.1 miles west), Church of St Andrew (0.5 miles south-west) and The Beacon School (1.7 miles north). Kingswood has its own railway station: Kingswood station. Other landmarks nearby include The Ashley Centre (3.8 miles north-west) and Walton on the Hill (1.7 miles west). For a walk, there is Colley Hill and Cuddington Meadows.

Map of Kingswood © OpenStreetMap contributors

What happens on the day

You do not need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a couple of hours, and you’re welcome to carry on with your day while we work.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. Fresh silicone is applied in a continuous bead.
  5. We smooth the bead, remove the tape and leave it to cure.

Before we arrive

  • Keep a parking space free if you can
  • Let the surface dry out before the visit
  • Mention any parking restrictions or tricky access

Get a quote

We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a free quote

Related advice

Landlord and trade work in Kingswood

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.