Perth and Kinross · Scotland
Bath Re-enamelling in Kinloch Rannoch
Full bath re-enamelling and resurfacing at your home in Kinloch Rannoch, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Stains that won’t shift
Questions from Kinloch Rannoch
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you repair something that’s been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Bath re-enamelling in Kinloch Rannoch, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on Victorian roll-tops, pressed steel baths and acrylic baths, and the jobs we see most are a coating lifting around the plughole and wear marks under the taps.
Big or small, you get the same one-year guarantee in Kinloch Rannoch and across Perth and Kinross.
- Area
- Kinloch Rannoch (PH16)
- Region
- Perth and Kinross
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Most damage we see is avoidable. A few tips:
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Make sure the area is dry
- Clear the area around the damage
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
Places near Kinloch Rannoch
Also in Kinloch Rannoch
Common problems we fix in Kinloch Rannoch
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- Thin, worn enamel in places
What to look for in a quote
- Whether there are any call-out or travel charges
- How soon you can use it again
- Whether they match the colour on site
- What happens if they find more damage
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Covering Kinloch Rannoch
Kinloch Rannoch is about 33 miles west of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH16, a technician comes to you. We cover 107 places in Perth and Kinross. You can also see our page for Glasgow, about 59 miles away.
Every address in PH16 is within our area, from the main roads to the quietest streets. Local streets include Riverbank Crescent, Allt Mor Crescent and Allt Mor Place, all of which we cover. We also cover the places around Kinloch Rannoch: Trinafour (5 miles north-east), Boreland (9 miles south-east), Fearnan (9 miles south-east), Old Struan (10 miles north-east) and Kenmore (11 miles south-east).
Landmarks near Kinloch Rannoch
Typical jobs here are in homes near The Old Church Of Rannoch, among other places. For a walk, there’s Dunalastair Water.
Prices and what affects them
Prices start from £350. We price every job individually. What matters most is:
- Any earlier repairs that need removing first
- What kind of damage it is
- Where the damage is and how we get to it
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- A picture taken from further back
- Daylight if possible, and no flash reflection
Send us a picture of the damage and a wider shot of the whole item, with your PH16 postcode, and we’ll reply with a fixed price.
Repairing versus replacing in Kinloch Rannoch
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why book with us
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- Fixed prices from your photos
- Everything repaired in place
Read our pricing or bath cost comparison.
Work for landlords and builders
For anyone letting property in or around Kinloch Rannoch, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
