Essex · England
Bath Repair for Kirby Cross homes
Local bath repair for Kirby Cross: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust spots around the plughole
- A chipped rim or side
What we’re called out for in Kirby Cross
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
It’s worth getting a quote if you see:
- Rust by the waste and overflow
- Chips on the rim or sides
- A cracked acrylic bath
- Scratches you can feel with a fingernail
Questions to ask before you book
- Who will actually do the work
- A fixed quote, and whether VAT is included
- How changes to the job are handled
- How long it needs to cure
About our bath repair in Kirby Cross
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Whether it’s a failed DIY repair that’s discoloured or lifting and chips under the taps, we can help, on acrylic, cast iron enamel and pressed steel enamel alike.
All our work is covered by our one-year guarantee, wherever you are in Essex.
- Area
- Kirby Cross (CO13)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Keeping it looking good
It’s all simple stuff:
- Check that an acrylic bath doesn’t move when you stand in it
- Do not leave razors or cans standing in the bath
- Do not scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Work for landlords and builders
Landlords, letting agents and housing providers in Kirby Cross use us as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
For anyone letting property in or around Kirby Cross, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Should you replace it?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Kirby Cross. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Same prices wherever you are
Take a look at our full price list or guide to resurfacing and replacement costs.
The process
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Make sure the room can be ventilated
- Have somewhere for us to park nearby if possible
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Read more
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Kirby Cross questions
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
How long does the repair take to cure?
Typically within a day, though it depends on what we’ve done.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Do you work in Kirby Cross?
Yes, we do. Technicians travel to Kirby Cross from across the region, and the price is the same as everywhere else.
Towns and villages near Kirby Cross
What else we do in Kirby Cross
Kirby Cross and nearby
Kirby Cross is about 5 miles north-east of Clacton-on-Sea, in Essex. Anywhere in CO13, a technician comes to you. We work in 644 places in Essex. You can also see our page for London, about 62 miles away.
Our visits in CO13 are booked in the same way as anywhere else. Whether you live on Turpins Lane, Hunt Way and Stubbs Close or anywhere nearby, a technician can come to you. Close by, we cover Frinton-on-Sea (1 mile south-east), Kirby-le-Soken (1 mile north-west), Walton-on-the-Naze (1 mile east), Great Holland (1 mile south-west) and Lane End (2 miles north-west). Within a short drive, we also cover Colchester (15 miles west), Clacton-on-Sea (5 miles south-west), Harwich (6 miles north), Greenstead (13 miles west), Wivenhoe (12 miles west) and Brightlingsea (9 miles west).
What’s near Kirby Cross
Our clients here include homes close to Tendring Technology College, St Mary Magdalene and The Ship pub. Also close by are Frinton Park (0.6 miles east) and Frinton-on-Sea Primary School (under half a mile south). There is a railway station in Kirby Cross itself: Frinton-On-Sea station. Green spaces nearby include Great Holland Pits.
Honest limits
We’ll always be straight with you, so here’s what a repair will not do:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly before booking.
Materials we work on in Kirby Cross
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
