Cumbria · England
Bath Re-enamelling for Kirkbampton homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Kirkbampton. Send photos for a free, fixed quote.
- Resurfacing from £350
- Stains that will not shift
- An old resurfacing that’s failing
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- The type of damage
- Where the damage is and how we get to it
- How much damage there is
- How hard the colour is to match
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Send pictures for a quote
You can usually get a fixed quote without us visiting. To make it quick:
- A photo taken from further back
- Whether it’s been repaired or coated before
- Something in shot to show the size
- Natural light rather than flash
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Bath re-enamelling at your home in Kirkbampton
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and people most frequently call us about chips and rust in more than one place and a period or roll-top bath worth keeping.
Every repair is covered by a one-year guarantee, wherever you are in Cumbria.
- Where
- Kirkbampton (CA5)
- County
- Cumbria
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Avoid suction-cup mats
- Fix dripping taps quickly
- Don’t leave bottles, razors or sponges standing on the surface
- Get any chip repaired quickly
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common questions in Kirkbampton
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
Does re-enamelling smell?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are there extra charges for Kirkbampton?
We don’t add a call-out fee. Your fixed quote includes everything.
What we’re called out for in Kirkbampton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Send us a photo if you notice any of these:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- Thin, worn enamel in places
Comparing quotes
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How to look after the finish
- What the guarantee covers, and for how long
Also near Kirkbampton
Other services in Kirkbampton
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Ask for a price
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
About Kirkbampton
Kirkbampton is about 6 miles west of Carlisle, in Cumbria. We visit homes and businesses in Kirkbampton and nearby villages, so you do not need to take anything anywhere. We cover all 438 towns and villages in Cumbria, from the larger towns to small villages. We work right across the region, from Kirkbampton to Newcastle upon Tyne (57 miles away).
Here we cover the CA5 postcode area. If you’re just outside Kirkbampton, we cover Thurstonfield (1 mile east), Moorhouse (1 mile east), Burgh-by-Sands (2 miles north-east), North End (2 miles north-east) and Great Orton (2 miles south-east). Within a short drive, we also cover Carlisle (6 miles east), Currock (6 miles east), Raffles (4 miles east), Botcherby (6 miles east), Morton (5 miles east) and Wigton (6 miles south-west).
Near you in Kirkbampton
Around Kirkbampton, we work in homes near Kirkbampton CofE School and St Peter's Church, among other places. Further afield, we also cover the area around Burgh by Sands Castle (2.3 miles north-east) and Cumberland Infirmary (4.7 miles east). For a walk, there is Thurstonfield Lough.
Repairing versus replacing in Kirkbampton
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Kirkbampton
- Colour-matched on site
- One visit for most repairs
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
See our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
