North Yorkshire · England
Bath re-enamelling & resurfacing in Kirkby Malham, North Yorkshire
Damaged bath in Kirkby Malham? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Stains that won’t shift
Repair or replace in Kirkby Malham?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Kirkby Malham
- Straight answers about what a repair can do
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- No need to remove anything
Read our prices page and guide to resurfacing and replacement costs.
Bath re-enamelling in Kirkby Malham without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, acrylic baths and cast iron baths, and the jobs we see most are an original cast iron bath that needs restoring and a dull, rough surface that won’t come clean.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Kirkby Malham (BD23)
- Region
- North Yorkshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in Kirkby Malham
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
- Clear the area around the damage
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Covering Kirkby Malham
Kirkby Malham is about 8 miles north-west of Skipton, in North Yorkshire. From the centre of Kirkby Malham to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Kirkby Malham is one of 626 places in North Yorkshire where we work. You can also see our page for Leeds, about 30 miles away.
Our technicians cover all of the BD23 postcode area and the streets around it. Whether you live on Main Street and Green Gate or a nearby road, we can come to you. Neighbouring places we cover include Hanlith (1 mile north-east), Scosthrop (1 mile south), Airton (1 mile south), Malham (1 mile north) and Calton (1 mile south-east). We also work in nearby towns such as Skipton (8 miles south-east), Settle (5 miles west), Grassington (7 miles east), Embsay (8 miles south-east), Gargrave (5 miles south-east) and Giggleswick (5 miles west).
Near you in Kirkby Malham
Our customers here include homes close to Kirkby in Malhamdale United Voluntary Aided Primary School, St Michael's Church and The Victoria pub. The closest station to Kirkby Malham is Hellifield station, roughly 3.6 miles south-west of the centre. A little further out are Cob Castle (4.8 miles west) and Castleberg Hospital (5.6 miles west).
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- Repair dripping taps early
- Store bottles off the bath
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Common questions in Kirkby Malham
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
For landlords and businesses
If you manage property in Kirkby Malham, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
When we’d advise against a repair
We will always be straight with you, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Kirkby Malham. What changes the price is:
- How easy the damage is to reach
- The material and finish
- Doing more than one item at once
- How hard the colour is to match
Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- One picture of the whole bath
- The postcode, so we can plan the visit
- The material, if you know it
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
