North Yorkshire · England
Bath Re-enamelling in Hanlith
Full bath re-enamelling and resurfacing in Hanlith, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- A coloured bath you want in white
Bath re-enamelling in Hanlith without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. If you are dealing with a period or roll-top bath worth keeping and chips and rust in more than one place, we can help, on Victorian roll-tops, acrylic baths and cast iron baths alike.
Every repair comes with a one-year guarantee.
- Where
- Hanlith (BD23)
- Region
- North Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Landlord and trade work in Hanlith
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
For anyone letting property in or around Hanlith, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
When to call us in Hanlith
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Look out for these signs:
- A coloured bath you want in white
- Lots of chips and rust spots
- A roll-top that’s seen better days
- Stains that won’t shift
Comparing quotes
- How long it needs to cure
- Who turns up on the day
- How the colour is matched
- How to care for the finish
More services for Hanlith
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day, and we’ll keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Tell us about parking, stairs or access
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
How to get a price
For a price in Hanlith, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Hanlith: your questions answered
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
What happens next?
We come back with a fixed price, usually with dates to choose from. You are under no obligation.
How long will the bath be out of use?
Most baths are done in a day, ready the day after. We give you timings with the quote.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Covering Hanlith
Hanlith is about 8 miles north-west of Skipton, in North Yorkshire. Across the BD23 area, we carry out the work at your property. We cover 626 places across North Yorkshire. You can also see our page for Leeds, about 30 miles away.
Our visits in BD23 are booked in the same way as anywhere else. Other places close to Hanlith include Kirkby Malham (1 mile south-west), Malham (1 mile north), Scosthrop (1 mile south), Airton (1 mile south) and Calton (1 mile south). Further out, we also cover Skipton (8 miles south-east), Settle (5 miles west), Grassington (7 miles east), Embsay (8 miles south-east), Gargrave (5 miles south-east) and Giggleswick (6 miles west).
Landmarks near Hanlith
Typical jobs here are in homes near The Victoria pub, Kirkby in Malhamdale United Voluntary Aided Primary School and St Michael's Church and the streets around them. For rail, the closest station is Hellifield station, roughly 3.9 miles south-west of the centre. Well-known places in the area include Castleberg Hospital (5.9 miles west).
Aftercare tips
Looking after the surface is easy:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Prices and what affects them
Prices start from £350. We charge the same across the UK, including Hanlith. What changes the price is:
- Access to the area
- Previous DIY repairs that have to come out
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send photos for a quote
Before you send photos, a few simple things make all the difference:
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
What a repair can’t fix
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Hanlith
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
