Lincolnshire · England
Bath Re-enamelling for Kirkby on Bain homes
Fixed-price bath re-enamelling in Kirkby on Bain and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Covering Kirkby on Bain
Kirkby on Bain is about 13 miles north-west of Boston, in Lincolnshire. Clients in Kirkby on Bain get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We cover 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 74 miles away.
Postcode districts we cover here: LN10. Whether you live on Main Street and Tattershall Road or anywhere nearby, we can come to you. We also cover the places around Kirkby on Bain: Haltham (1 mile north), Tattershall Thorpe (2 miles south-west), Coningsby (3 miles south), Moor Side (3 miles south) and Martin (3 miles north). Within a short drive, we also cover Boston (13 miles south-east), Sleaford (15 miles south-west), Horncastle (5 miles north), Woodhall Spa (3 miles west), Witham (12 miles south) and Staniland (13 miles south).
What’s near Kirkby on Bain
In Kirkby on Bain, that means homes near The Ebrington Arms, Church of St Mary and The Kirkby-on-Bain Church of England Primary School, among other places. A little further out are Tattershall Castle (3.4 miles south-west) and Thorpe Camp (2.2 miles south-west). Green spaces nearby include Heath's Meadows and Langton Hill.
Bath re-enamelling in Kirkby on Bain without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people get in touch are a roll-top that’s seen better days and a peeling or bubbling previous coating.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Kirkby on Bain (LN10)
- Area hub
- Lincolnshire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
- Open a window if you can
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Read more
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Leaks from fittings rather than the bath
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
For landlords and businesses
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Kirkby on Bain. The price comes down to:
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- How many items we do on one visit
- The type of damage
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- One sharp close-up of the damage
- Something in shot to show the size
- A wider photo showing the entire bath
- Natural light rather than flash
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
FAQs for Kirkby on Bain
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Will there be a smell?
Expect a mild smell while we’re working.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is repairing better than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Nearby places to Kirkby on Bain
What else we do in Kirkby on Bain
What we are called out for in Kirkby on Bain
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Look out for these signs:
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- Stains that will not shift
- A bath in a colour that no longer suits
Questions to ask before booking
- Aftercare advice
- How long it needs to cure
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
Repairing versus replacing in Kirkby on Bain
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Work done at your home or business
- Honest advice, even when it means no job
- Nothing taken out or refitted
- Same prices wherever you are
See our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
