Lincolnshire · England
Bath re-enamelling & resurfacing in Martin, Lincolnshire
Bath re-enamelling in Martin without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Stains that will not shift
- Chips and rust in more than one place
Repair or replace in Martin?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Nothing taken out or refitted
- Fixed prices from your photos
- Dust sheets down, tidy finish
- We will tell you if it’s not worth repairing
Take a look at our full price list or bath cost comparison.
Bath re-enamelling at your home in Martin
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a bath that stays dull however much you clean it and staining under the taps and around the waste, we can normally put it right, whatever the material.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Martin (LN9)
- Region
- Lincolnshire
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
When to call us in Martin
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Keep an eye out for these signs:
- Wear marks under the taps
- A coating lifting around the plughole
- Several chips and rust patches
- Staining under the taps and around the waste
What your quote should include
- What the guarantee covers, and for how long
- Whether a trained technician does the job
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
Common questions in Martin
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Martin.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Landlord and trade work in Martin
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
What affects the price in Martin
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- The material
- Whether we combine several jobs
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed price
Two or three clear photos are usually enough. Try to include:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- The material, if you know it
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Towns and villages near Martin
More services for Martin
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take a full day.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
Preparing for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
How to get a price
Most clients in Martin get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Read more
Where we work around Martin
Martin is about 2 miles south-west of Horncastle, in Lincolnshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Martin is one of 732 towns and villages in Lincolnshire where we work. You can also see our page for Leeds, about 72 miles away.
All of LN9 is within our area, from the main roads to the quietest streets. We also cover the places around Martin: Thornton (1 mile north), Haltham (2 miles south), Kirkby on Bain (3 miles south), Tattershall Thorpe (5 miles south) and Coningsby (6 miles south). Larger places within reach include Boston (15 miles south), Louth (14 miles north-east), Woodhall Spa (4 miles south-west), Witham (15 miles south), Staniland (15 miles south) and Branston (14 miles west).
Around Martin
Locally, our jobs take us to homes close to The Banovallum School and Church of St. Michael. Well-known places in the area include Horncastle (2 miles north-east) and Woodhall Spa Cottage Museum (3.5 miles south-west). Open spaces near Martin include Heath's Meadows and Langton Hill.
About our accreditations · Every repair comes with a one-year guarantee.
