Lincolnshire · England
Bath re-enamelling & resurfacing in Moor Side, Lincolnshire
Damaged bath in Moor Side? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
Moor Side and the surrounding area
Moor Side is about 10 miles north-west of Boston, in Lincolnshire. Customers in Moor Side get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We work in 732 places in Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 76 miles away.
Jobs in PE22 are booked in the same way as anywhere else. Streets in the area include Sandy Bank and Langrick Road, all of which we cover. Close by, we cover Coningsby (1 mile west), Tattershall Thorpe (2 miles north-west), Tattershall (2 miles west), Kirkby on Bain (3 miles north) and Haltham (4 miles north). We also work in nearby towns such as Boston (10 miles south-east), Sleaford (14 miles south-west), Horncastle (7 miles north), Woodhall Spa (5 miles north-west), Witham (9 miles south-east) and Staniland (10 miles south-east).
Landmarks near Moor Side
Our customers here include homes close to The Barnes Wallis Academy and Lea Gate Public House, among other places. Further afield, we also cover the area around Tattershall Castle (2.3 miles west) and Battle Of Britain Memorial Flight Visitor Centre (1.7 miles west). Green spaces nearby include Heath's Meadows.
About our bath re-enamelling in Moor Side
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and common reasons people contact us are a roll-top that’s seen better days and brown or grey marks that don’t clean off.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Moor Side (PE22)
- County
- Lincolnshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Moor Side
- Colour-matched on site
- No need to remove anything
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and bath cost comparison.
The process
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
If in doubt, send pictures and we will say what we think.
Materials we work on in Moor Side
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Have chips seen to early
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Places near Moor Side
More services for Moor Side
Do you need bath re-enamelling in Moor Side?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The things customers generally mention when they call are:
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
Questions to ask before you book
- What happens if the damage is worse than the pictures show
- When it can be used again
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Moor Side: your questions answered
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
What information do you need?
Use the quote form or ring 0345 017 0787.
How much does bath re-enamelling cost in Moor Side?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Moor Side.
About our accreditations · Every repair comes with a one-year guarantee.
