Lancashire · England
Bath re-enamelling & resurfacing in Wesham, Lancashire
Full bath re-enamelling and resurfacing for homes and businesses in Wesham and across Lancashire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
Covering Wesham
Wesham is about 6 miles south-east of Poulton-le-Fylde, in Lancashire. Clients in Wesham get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Wesham is one of 482 places in Lancashire we cover. Our nearest city page is Liverpool, about 27 miles away.
We cover every part of the PR4 postcode area. Streets in the area include Station Road, Market Street and Garstang Road North, all of which we cover. If you are just outside Wesham, we cover Kirkham (1 mile south-east), Ribby (1 mile south-west), Treales (1 mile east), Hall Cross (2 miles south) and Newton-with-Scales (2 miles south-east). Further out, we also cover Preston (8 miles east), Chorley (14 miles south-east), Lytham St Anne's (6 miles south-west), Bamber Bridge (10 miles south-east), Leyland (10 miles south-east) and Fulwood (7 miles east).
Landmarks near Wesham
Our customers here include homes close to Carr Hill High School and Sixth Form Centre, Medlar-with-Wesham Church of England Primary School and Christ Church, among other places. There is a railway station in Wesham itself: Kirkham & Wesham station. A little further out are Lytham Hospital (4.4 miles south-west). Open spaces near Wesham include Marton Mere.
Bath re-enamelling in Wesham without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, and can be used again the following day. Common call-outs are for stains that won’t shift and several chips and rust patches, across Victorian roll-tops, basins & shower trays and cast iron baths.
Every repair comes with our one-year guarantee, wherever you are in Lancashire.
- Where
- Wesham (PR4)
- Region
- Lancashire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Wesham. The price reflects:
- Whether we combine several jobs
- Access to the area
- Whether old repairs or coatings need taking off
- What kind of damage it is
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- The material, if you know it
- A coin beside the damage so we can judge size
Email us a photo of the damage and one of the whole item, with your PR4 postcode, and we’ll come back with a fixed quote.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Before we arrive
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Have chips seen to early
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
What we are called out for in Wesham
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The things customers typically mention when they call include:
- An outdated colour you’d like to change
- Chips and rust in more than one place
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What to look for in a quote
- How the room is protected while they work
- Whether they match the colour on site
- What the guarantee covers, and for how long
- How long it needs to cure
What else we do in Wesham
Landlord and trade work in Wesham
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Common questions in Wesham
Do you cover the entire of Lancashire?
We work UK-wide. Prices don’t change with location.
Do you resurface freestanding baths?
Yes. Inside and out.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
