Staffordshire · England
Bath Re-enamelling for Knowle Style homes
Full bath re-enamelling and resurfacing at your home in Knowle Style, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
Aftercare tips
It’s all simple stuff:
- Don’t leave bottles, razors or sponges standing on the surface
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Bath re-enamelling at your home in Knowle Style
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and people most often call us about an old resurfacing that’s failing and staining under the taps and around the waste.
Every job is backed for twelve months in Knowle Style and everywhere else. If something goes wrong with the work, we come back.
- Location
- Knowle Style (ST8)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Knowle Style?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Keep an eye out for these signs:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
Questions to ask before you book
- The length of the guarantee and what it covers
- What aftercare is recommended
- How soon you can use it again
- Whether cleaning and preparation are in the price
Landlord and trade work in Knowle Style
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Send the address, pictures and access details.
FAQs for Knowle Style
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath re-enamelling cost in Knowle Style?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your ST8 postcode.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Repairing versus replacing in Knowle Style
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface without moving it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Knowle Style. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Nothing taken out or refitted
- Same prices wherever you are
- Free fixed quotes from pictures
- Usually one visit, start to finish
See our pricing and resurfacing vs replacement cost guide.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, including clearing up.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Getting a price
Upload a picture of the damage and a wider shot of the entire item, with your ST8 postcode, and we will come back with a fixed quote.
Read more
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- The material
- Unusual colours or finishes
- How easy the damage is to reach
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from photos
Phone photos are fine. Make sure they show:
- Natural light rather than flash
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What a repair can’t fix
To be straight with you, there are a few things a repair will not fix:
- Acrylic that moves when you stand in it
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Where we work around Knowle Style
Knowle Style is about 4 miles south of Congleton, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Knowle Style is one of 512 places in Staffordshire we cover. Our jobs stretch from Knowle Style to Manchester (25 miles away).
Our technicians cover all of ST8. Whether you live on Park Lane, Wharf Road and Church Road or a nearby road, a technician can come to you. With the A527 close by, Knowle Style is easy for our repair technicians to reach. Neighbouring places we cover include Braddocks Hay (1 mile south-west), Knypersley (1 mile south-west), Newpool (1 mile west), Biddulph (1 mile north-east) and Brown Lees (1 mile south-west). We also work in nearby towns such as Newcastle-under-Lyme (7 miles south), Longton (9 miles south), Stone (15 miles south), Leek (6 miles east), Alsager (6 miles west) and Kidsgrove (3 miles south-west).
Around Knowle Style
We visit homes around Knypersley First School, Church of St John the Evangelist and Crown & Cushion pub and the streets around them. Nearby too are Biddulph High School (0.5 miles south-east) and Biddulph Valley Park (0.7 miles north-east). Knowle Style’s nearest station is Kidsgrove station, about 3.2 miles south-west. A little further out are Haywood Hospital (3.7 miles south) and Mow Cop Chapel Museum (1.6 miles west). Not far away are The Cloud and Limekiln Wood Nature Reserve.
Also near Knowle Style
Also in Knowle Style
About our accreditations · Every repair comes with a one-year guarantee.
