Staffordshire · England
Bath re-enamelling & resurfacing in Newpool, Staffordshire
Fixed-price bath re-enamelling in Newpool and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A peeling or bubbling previous coating
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bath re-enamelling in Newpool without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for a bath that stays dull however much you clean it and a coating lifting around the plughole, across pressed steel baths, cast iron baths and Victorian roll-tops.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Newpool (ST8, ST7)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Newpool
More services for Newpool
Your questions about bath re-enamelling in Newpool
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How much does bath re-enamelling cost in Newpool?
Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.
How long will the bath be out of use?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Landlord and trade work in Newpool
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Newpool and nearby
Newpool is about 1 mile south-west of Biddulph, in Staffordshire. Wherever you are in the ST8 postcode area, we carry out the work at your property. We cover 512 places in Staffordshire. You can also see our page for Manchester, about 25 miles away.
Here we cover the ST8 and ST7 postcode area. Jobs here include addresses on Wharf Road, Conway Road and Knowle Road. Newpool is on the A527, so it’s easy for us to reach. We also cover the places around Newpool: Braddocks Hay (1 mile east), Knypersley (1 mile south-east), Knowle Style (1 mile east), Biddulph (1 mile north-east) and Brown Lees (1 mile south). Within a short drive, we also cover Newcastle-under-Lyme (7 miles south), Longton (9 miles south), Stone (15 miles south), Leek (7 miles east), Alsager (5 miles west) and Kidsgrove (3 miles south-west).
Near you in Newpool
We visit homes around Crown & Cushion pub, Biddulph High School and Knypersley First School and the streets around them. Also close by are Church of St John the Evangelist (less than half a mile east) and Biddulph Valley Park (0.9 miles north-east). The nearest railway station is Kidsgrove station, roughly 3 miles south-west of the centre. A little further out are Haywood Hospital (3.6 miles south) and Mow Cop Chapel Museum (1.3 miles west). Open spaces near Newpool include Limekiln Wood Nature Reserve and Astbury Mere.
Signs you need bath re-enamelling in Newpool
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people get in touch when they notice one of these:
- Lots of chips and rust spots
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What your quote should include
- How changes to the job are handled
- Whether they match the colour on site
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- What the surface is made of
- How much damage there is
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- Any details about the material
- One picture of the whole bath
- Daylight if possible, and no flash reflection
For a price in Newpool, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the day after.
How to prepare
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why Newpool customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
- Fixed prices from your pictures
- Honest advice, even when it means no job
Take a look at our prices page or bath cost comparison.
How to look after the repair
To keep it looking its best:
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Never use suction bath mats
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
