Na h-Eileanan Siar · Scotland
Bath Re-enamelling for Lacasaidh homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Lacasaidh. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Enamel that’s lost its shine and feels rough
Bath re-enamelling in Lacasaidh, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s enamel that’s lost its shine and feels rough and chips and rust in more than one place, we can usually put it right, on acrylic baths, cast iron baths and basins & shower trays alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- Lacasaidh (HS2)
- County
- Na h-Eileanan Siar
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Open a window if you can
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
For anyone letting property in or around Lacasaidh, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
What a repair cannot fix
We will always be straight with you, so here’s what a repair can’t fix:
- Leaks from fittings rather than the bath
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Lacasaidh questions
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Repair or replace in Lacasaidh?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Dust sheets down, tidy finish
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
See our full price list and bath cost comparison.
Places near Lacasaidh
Also in Lacasaidh
Lacasaidh and nearby
Lacasaidh is in Na h-Eileanan Siar. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover all 87 towns and villages across Na h-Eileanan Siar, from the larger towns to small villages.
We cover every part of the HS2 postcode area. Nearby, we also work in Baile Ailein (3 miles west), Liurbost (3 miles north-east), North Lochs (4 miles north-east), Crosbost (4 miles north-east) and Marybank (9 miles north-east). If you’re somewhere remote, call first so we can plan the visit.
Local landmarks in Lacasaidh
Our customers here include homes close to Kinloch Church, among other places. Further afield, we also cover the area around Ravenspoint Centre Museum (1 mile south-east). Open spaces near Lacasaidh include Nisreaval and Loch na Craoibhe.
Signs you need bath re-enamelling in Lacasaidh
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The most common problems we’re called about are:
- An old resurfacing that is failing
- A roll-top that’s seen better days
- Stains that will not shift
- Lots of chips and rust spots
What your quote should include
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
- What prep work is covered
- A fixed quote, and whether VAT is included
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
