Cornwall · England

Bath Re-enamelling for Laddenvean homes

Our repair technicians come to Laddenvean for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Laddenvean

Bath re-enamelling in Laddenvean without replacing anything

The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the following day. Common call-outs are for stains that won’t shift and a coloured bath you want in white, across basins & shower trays, cast iron baths and Victorian roll-tops.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.

Location
Laddenvean (TR12)
County
Cornwall
Cover
12 months on all our work
Price
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

Repairs by material

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.

FAQs for Laddenvean

Can you fix a peeling bath coating?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

Which areas do you work in?

All of Cornwall, and the rest of the UK. Travel is included in the price.

Can I get a quote without a visit?

Nearly always. If photos don’t show enough, we will ask for another angle.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

Does re-enamelling smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

Can you repair several things at once?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

Do you need bath re-enamelling in Laddenvean?

Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

It’s worth getting a quote if you see:

  • Brown or grey marks that don’t clean off
  • A roll-top that’s seen better days
  • A coloured bath you want in white
  • A peeling or bubbling previous coating

What to look for in a quote

  • What happens if the damage is worse than the pictures show
  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price
  • Whether the price is fixed and includes VAT

How to compare quotes

When a repair isn’t the answer

It helps to know what we can’t do too:

  • A cast iron or steel bath that’s cracked right through
  • A bath that is rusted through
  • Anything hidden under an old coating, until we remove it

Send us photos and we’ll tell you honestly.

Materials we repair

  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops

Repair or replace: which is better?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.

Why book with us

  • One visit for most repairs
  • A fixed quote before booking
  • Dust sheets down, tidy finish
  • No extra charge for your area

Read our full price list or bath cost comparison.

Laddenvean and the surrounding area

Laddenvean is about 7 miles south of Falmouth, in Cornwall. We travel to homes and businesses in Laddenvean and nearby villages, so you do not need to take anything anywhere. Laddenvean is one of 644 places in Cornwall where we work.

We cover every part of the TR12 postcode area and the streets around it. Jobs here include addresses on Commercial Road and Lanheverne Parc and the roads around them. We also travel to St Keverne (1 mile south-east), Porthallow (1 mile north-east), Coverack (2 miles south), Tregidden (2 miles north-west) and Manaccan (3 miles north-west). Larger places within reach include Truro (15 miles north), Falmouth (7 miles north), Camborne (14 miles north-west), Redruth (14 miles north-west), Helston (9 miles north-west) and Rosewarne (15 miles north-west).

Local landmarks in Laddenvean

In Laddenvean, that means homes near Church of St Akeveranus, St Keverne Community Primary School and The White Hart pub. Open spaces near Laddenvean include Goonhilly Downs.

Map of Laddenvean © OpenStreetMap contributors

Work for landlords and builders

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

The process

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

Preparing for the visit

  • Move bottles, mats and clutter away from the area
  • Point us to the nearest place to park
  • Tell us about any previous repairs or coatings

Get a quote

Most customers in Laddenvean get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Read more

How to care for the repair

It’s all simple stuff:

  • Fix dripping taps quickly
  • Do not leave bottles, razors or sponges standing on the surface
  • Avoid suction-cup mats
  • Don’t use the bath until it has fully cured

Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.