Somerset · England
Bath re-enamelling & resurfacing in Queen Camel, Somerset
Bath re-enamelling in Queen Camel without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that do not clean off
Bath re-enamelling in Queen Camel, done in place
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include brown or grey marks that don’t clean off and a bath that stays dull however much you clean it, across Victorian roll-tops, pressed steel baths and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Queen Camel (BA22)
- County
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Make sure the area is dry
- Let us know about parking or access
- Plan for the room to be out of bounds to pets and children
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Looking after it afterwards
Nothing complicated is needed:
- Fix dripping taps quickly
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Queen Camel. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Queen Camel customers choose us
- We will tell you if it’s not worth repairing
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- One visit for most repairs
Take a look at our pricing or guide to resurfacing and replacement costs.
Places near Queen Camel
What else we do in Queen Camel
Queen Camel and the surrounding area
Queen Camel is about 6 miles north-east of Yeovil, in Somerset. Whether you’re in the middle of Queen Camel or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover 640 places in Somerset, from the larger towns to small villages.
Jobs in BA22 are booked in the same way as anywhere else. Jobs here include addresses on High Street, Mildmay Drive and Laurel Lane. Nearby, we also work in Wales (1 mile west), Eyewell (1 mile north-west), Lambrook (1 mile south), Sparkford (1 mile north-east) and Sutton Montis (2 miles east). Further out, we also cover Yeovil (6 miles south-west), Wells (13 miles north), Shepton Mallet (12 miles north), Street (10 miles north-west), Glastonbury (11 miles north-west) and Crewkerne (13 miles south-west).
What’s near Queen Camel
Typical jobs here are in homes near Church of St Barnabas, Countess Gytha Primary School and Mildmay Arms and the streets around them. Further afield, we also cover the area around Yeovil Hospital (5.8 miles south-west) and Haynes Motor Museum (1.6 miles north-east).
Queen Camel questions
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you cover the whole of Somerset?
Across the UK, so Queen Camel is covered. Our prices are the same everywhere.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Do you work in Queen Camel?
Yes, we do. We send a technician to Queen Camel for every job, and the price is the same as everywhere else.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
When to call us in Queen Camel
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
- An original cast iron bath that needs restoring
What your quote should include
- Who turns up on the day
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Queen Camel
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The material
- The type of damage
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Two or three clear pictures are normally enough. It helps if you send:
- One picture of the whole bath
- Your postcode, so we can check dates
- Details of any past repairs
- Any details about the material
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
