Pembrokeshire · Wales
Bath Re-enamelling in Lampeter Velfrey
Damaged bath in Lampeter Velfrey? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An old resurfacing that is failing
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- How easy the damage is to reach
- The material
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
Two or three clear pictures are normally enough. It helps if you send:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Your postcode, so we can check dates
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Bath re-enamelling in Lampeter Velfrey, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. If you are dealing with a period or roll-top bath worth keeping and lots of chips and rust spots, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Lampeter Velfrey (SA67)
- County
- Pembrokeshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What happens on the day
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes most of the day. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Have a window or extractor fan available
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
Get a quote
If you’re in Lampeter Velfrey and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Also near Lampeter Velfrey
Also in Lampeter Velfrey
Repairing versus replacing in Lampeter Velfrey
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Rooms protected and left tidy
- Everything repaired in place
- Colour-matched on site
- Honest advice, even when it means no job
Take a look at our prices page and bath cost comparison.
When a repair is not the answer
Some jobs are not right for a repair, including:
- Acrylic that moves when you stand in it
- A bath that’s rusted through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Work for landlords and builders
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Lampeter Velfrey as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Questions from Lampeter Velfrey
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Do you cover the entire of Pembrokeshire?
All of Pembrokeshire, and the rest of the UK. There’s no extra charge for travel.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you work in Lampeter Velfrey?
Yes. We work across the UK and travel to Lampeter Velfrey and the rest of Pembrokeshire. Send pictures and we will quote, or call 0345 017 0787.
Lampeter Velfrey and nearby
Lampeter Velfrey is about 13 miles east of Haverfordwest, in Pembrokeshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Lampeter Velfrey is one of 223 places in Pembrokeshire we cover.
We work across SA67 and the streets around it. Nearby, we also work in Tavernspite (2 miles south-east), Ludchurch (2 miles south), Llanteg (3 miles south-east), Crunwere (3 miles south-east) and Stepaside (4 miles south). We also work in nearby towns such as Haverfordwest (13 miles west), Pembroke (13 miles south-west), Pembroke Dock (14 miles south-west), The Marsh (12 miles west), Dinbych-y-Pysgod (9 miles south) and The Green (9 miles south).
Local landmarks in Lampeter Velfrey
Around Lampeter Velfrey, we work in homes near Church of St. Peter. The closest station to Lampeter Velfrey is Narberth station, about 2.2 miles west. A little further out are Narberth Museum (2.9 miles west) and Castell Cynon (under half a mile north-west). Open spaces near Lampeter Velfrey include Llanddewi Gaer.
- Other local spots include Narberth (2.9 miles west)
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Don’t let dyes or oils sit on the finish
- Do not leave a chip unrepaired
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
