Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Stepaside, Pembrokeshire
Damaged bath in Stepaside? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- An old resurfacing that’s failing
Bath re-enamelling in Stepaside, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s chips and rust in more than one place and a coating lifting around the plughole, we can help, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
Every repair comes with a one-year guarantee, wherever you are in Pembrokeshire.
- Area
- Stepaside (SA67)
- Area hub
- Pembrokeshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Prices start from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why Stepaside customers choose us
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Everything repaired in place
Take a look at our pricing or guide to resurfacing and replacement costs.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before we go, we will explain how long to leave it and how to care for it.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the following day.
How to prepare
- Tell us about parking, stairs or access
- Open a window if you can
- Point us to the nearest place to park
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Stepaside questions
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we will ask.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
What areas do you cover?
Everywhere in the UK, Stepaside included. Travel is included in the price.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you come to Stepaside?
Yes, we do. Technicians travel to Stepaside from across the region, and the price is the same as everywhere else.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Signs you need bath re-enamelling in Stepaside
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
These are the problems we’re asked about most:
- Lots of chips and rust spots
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- Whether the price is fixed and includes VAT
- How soon you can use it again
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How hard the colour is to match
- How much damage there is
- How easy the damage is to reach
- Whether we combine several jobs
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A picture taken from further back
- The postcode, so we can plan the visit
- Natural light rather than flash
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Aftercare tips
Most damage we see is avoidable. A few tips:
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Store bottles off the bath
- Never use suction bath mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Also near Stepaside
What else we do in Stepaside
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll arrange it.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Stepaside and the surrounding area
Stepaside is about 12 miles east of Haverfordwest, in Pembrokeshire. We visit homes and businesses in Stepaside, so nothing has to leave your home. Stepaside is one of 223 towns and villages in Pembrokeshire we cover.
We work across SA67. Local streets include Kilgetty Lane and Bryn Beudy, all of which we cover. Nearby, we also work in Summerhill (1 mile east), Ludchurch (2 miles north), Amroth (2 miles east), Llanteg (3 miles north-east) and Crunwere (4 miles north-east). Within a short drive, we also cover Haverfordwest (12 miles west), Milford Haven (14 miles west), Pembroke (10 miles south-west), Pembroke Dock (11 miles west), The Marsh (12 miles west) and Dinbych-y-Pysgod (5 miles south).
Local landmarks in Stepaside
We visit homes around The White Horse pub, Sardis Congregational Chapel and Stepaside C.P. School. For rail, the closest station is Kilgetty station, about 0.8 miles south-west of the centre. Well-known places in the area include Tenby Cottage Hospital (4.2 miles south) and Hean Castle Motte (1.2 miles south). Green spaces nearby include Craig-y-borion.
About our accreditations · Every repair comes with a one-year guarantee.
