Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Summerhill, Pembrokeshire
Fixed-price bath re-enamelling in Summerhill and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A coloured bath you want in white
- An old resurfacing that’s failing
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- A cast iron or steel bath that is cracked right through
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Summerhill
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Bath re-enamelling in Summerhill, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair basins & shower trays, acrylic baths and Victorian roll-tops, and people most often call us about a peeling or bubbling previous coating and worn patches where water runs and sits.
Every repair comes with a one-year guarantee, wherever you are in Pembrokeshire.
- Area
- Summerhill (SA67)
- Area hub
- Pembrokeshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- Previous DIY repairs that have to come out
- What kind of damage it is
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
How to get a fixed quote
Phone photos are fine. Ensure they show:
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- Any earlier repairs or coatings
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say right away whether it can be repaired.
Places near Summerhill
More services for Summerhill
What happens on the day
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Clear the area around the damage
- Tell us about parking, stairs or access
- Have a window or extractor fan available
How to get a price
Most clients in Summerhill get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
Summerhill and nearby
Summerhill is about 13 miles east of Haverfordwest, in Pembrokeshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in all 223 towns and villages in Pembrokeshire, from the larger towns to small villages.
We work across SA67. Neighbouring places we cover include Stepaside (1 mile west), Amroth (1 mile east), Ludchurch (2 miles north), Llanteg (3 miles north-east) and Crunwere (3 miles north-east). We also work in nearby towns such as Haverfordwest (13 miles west), Milford Haven (15 miles west), Pembroke (11 miles west), Pembroke Dock (12 miles west), The Marsh (13 miles west) and Dinbych-y-Pysgod (4 miles south).
Landmarks near Summerhill
Typical jobs here are in homes near St Elidyr's Church and Templebar Inn. The nearest railway station is Kilgetty station, about 1.6 miles west. A little further out are Tenby Cottage Hospital (4 miles south) and Amroth Castle Park (0.8 miles east). For a walk, there’s Craig-y-borion.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Common questions in Summerhill
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Keeping it looking good
So the finish stays in good condition:
- Rinse off hair dye, oils and bath bombs immediately
- Wipe the bath dry after use in hard water areas
- Don’t use the bath until it has fully cured
- Don’t leave bottles, razors or sponges standing on the surface
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Signs you need bath re-enamelling in Summerhill
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Contact us if you’ve noticed:
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
- Lots of chips and rust spots
- An outdated colour you’d like to change
What to look for in a quote
- Whether cleaning and preparation are in the price
- How the colour is matched
- How to care for the finish
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
