Lancashire · England
Bath Re-enamelling in Kelbrook
Bath re-enamelling across Kelbrook and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Kelbrook
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and the jobs we see most are chips and rust in more than one place and a coating lifting around the plughole.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Kelbrook (BB18)
- Region
- Lancashire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Kelbrook
Kelbrook is about 2 miles south-east of Barnoldswick, in Lancashire. Jobs in Kelbrook are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We cover all 482 towns and villages in Lancashire. Our jobs stretch from Kelbrook to Leeds (25 miles away).
Postcode districts we cover here: BB18. Local streets include Main Street, Unity Street and Waterloo Road, all of which we cover. We also cover the places around Kelbrook: Hey (2 miles south-west), Foulridge (2 miles south-west), Laneshaw Bridge (3 miles south-east), Monkroyd (3 miles south-east) and Colne (3 miles south). Further out, we also cover Burnley (8 miles south-west), Accrington (13 miles south-west), Nelson (5 miles south-west), Rawtenstall (15 miles south), Clitheroe (10 miles west) and Haslingden (15 miles south-west).
Landmarks near Kelbrook
Around Kelbrook, we work in homes near West Craven High Technology College, St Mary's Church and The Craven Heifer Inn and the streets around them. The closest station to Kelbrook is Colne station, roughly 3.2 miles south-west. A little further out are Pendle Community Hospital (4.8 miles south-west) and Bancroft Shed (1.9 miles north-west). Open spaces near Kelbrook include Noyna Hill.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Signs you need bath re-enamelling in Kelbrook
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
You may need us if you’ve spotted:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
Questions to ask before you book
- How soon you can use it again
- Whether there are any call-out or travel charges
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- Fixed prices from your photos
- One price list for the whole UK
- Work done at your home or business
- Nothing taken out or refitted
See our prices page and bath cost comparison.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Make sure the room can be ventilated
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Kelbrook: your questions answered
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Kelbrook.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How much does bath re-enamelling cost in Kelbrook?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Also near Kelbrook
What else we do in Kelbrook
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Aftercare tips
After the repair has cured, a few habits help it last:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What kind of damage it is
- How much damage there is
- How many items we do on one visit
- Where the damage is and how we get to it
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- Any details about the material
- Where you are, by postcode
For a price in Kelbrook, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
