Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Letham, Perth and Kinross
Bath re-enamelling in Letham without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- An old resurfacing that’s failing
- Thin, worn enamel in places
Bath re-enamelling in Letham, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s wear marks under the taps and a bath that stays dull however much you clean it, we can usually put it right.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Letham (PH1)
- Area hub
- Perth and Kinross
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs immediately
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Also near Letham
What else we do in Letham
Letham: your questions answered
Do you cover Letham?
Yes. We work across the UK and come to Letham and the rest of Perth and Kinross. Send us photos for a fixed quote, or call 0345 017 0787.
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Landlord and trade work in Letham
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Letham, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
What a repair can’t fix
A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:
- A metal bath with a through crack
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- What the surface is made of
- How many items we do on one visit
- How many areas need work
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
Good pictures mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- The postcode, so we can plan the visit
To get a price, send a couple of photos using our quote form or call us. We’ll say straight away if a repair is the right fix.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we are called out for in Letham
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
People typically call us after spotting one of these:
- Thin, worn enamel in places
- A roll-top that is seen better days
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
What to look for in a quote
- Whether they match the colour on site
- How the room is protected while they work
- What preparation is included
- What aftercare is recommended
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let us know about parking or access
- Let the surface dry out before the visit
Get a quote
Email us pictures of the damage and one of the whole item, with your PH1 postcode, and we will come back with a fixed quote.
Related advice
About Letham
Letham is about 1 mile west of Perth, in Perth and Kinross. Our technicians come to homes and businesses in Letham, so nothing has to leave your home. Letham is one of 107 places in Perth and Kinross where we work. Our jobs stretch from Letham to Edinburgh (33 miles away).
We work across the PH1 postcode area and the streets around it. From Elm Lane, Leny Road and Fittis Road or anywhere nearby, a technician can come to you. Nearby, we also work in Hillyland (1 mile north-west), Huntingtower (1 mile north-west), Tulloch (1 mile north), Ruthvenfield (1 mile north-west) and Scone (3 miles north-east). Within a short drive, we also cover Blairgowrie and Rattray (14 miles north), Crieff (14 miles west), Auchterarder (11 miles south-west), Kinross (13 miles south), Coupar Angus (13 miles north-east) and Rattray (14 miles north-east). Being one of Perth and Kinross’s larger places, Letham sees plenty of our work.
Local landmarks in Letham
Our clients here include homes close to Perth High School and North Inch. The closest station to Letham is Perth station, roughly 1.6 miles south-east. Other landmarks nearby include Murray Royal Hospital (2.2 miles east) and Huntingtower Castle (0.8 miles north-west). Not far away are Dupplin Lake and Mailer Hill.
About our accreditations · Every repair comes with a one-year guarantee.
