Perth and Kinross · Scotland
Bath Re-enamelling for Kinross homes
Fixed-price bath re-enamelling in Kinross and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Lots of chips and rust spots
- An old resurfacing that’s failing
Kinross and the surrounding area
Kinross is about 10 miles north of Dunfermline, in Perth and Kinross. Anywhere in KY13, we carry out the work at your property. Kinross is one of 107 towns and villages in Perth and Kinross we cover. Our nearest city page is Edinburgh, about 20 miles away.
Our visits in KY13 are booked in the same way as anywhere else. That includes homes on Station Road, High Street and Mcbain Place and the roads around them. You’ll find Kinross on the A922 and A977, which makes it straightforward to reach. Other places close to Kinross include Milnathort (1 mile north), Balado (1 mile west), Gairney Bank (2 miles south), Gairneybridge (3 miles south) and Wester Balgedie (3 miles east). Within a short drive, we also cover Perth (13 miles north), Auchterarder (12 miles north-west), Letham (13 miles north), Scone (15 miles north), Tulloch (14 miles north) and Oakbank (12 miles north). As one of the bigger places in Perth and Kinross, Kinross sees plenty of our work.
Near you in Kinross
Around Kinross, we work in homes near The Green Hotel, St Paul's Episcopal Church and Kinross High School, among other places. Further afield, we also cover the area around Michael Bruce Cottage Museum (3.8 miles east) and Loch Leven Castle (1.6 miles south-east). Open spaces near Kinross include Loch Leven and Loch Leven National Nature Reserve.
Bath re-enamelling at your home in Kinross
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for staining under the taps and around the waste and an old resurfacing that’s failing, on basins & shower trays, cast iron baths and acrylic baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Area
- Kinross (KY13)
- Region
- Perth and Kinross
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Kinross?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Worn patches where water runs and sits
What to look for in a quote
- What the guarantee covers, and for how long
- Who will actually do the work
- Whether they match the colour on site
- How your room will be protected
Nearby places to Kinross
More services for Kinross
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Kinross
- Every repair guaranteed for a year
- One visit for most repairs
- Colours mixed by hand to suit your surface
- No need to remove anything
See our prices page or guide to resurfacing and replacement costs.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Kinross. The price depends on:
- The size and number of damaged areas
- The material
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
Our prices are the same across the UK, with no extra for Kinross. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
Before you send photos, these tips help us give you a firm price:
- A picture taken from further back
- The material, if you know it
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Common questions in Kinross
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath re-enamelling cost in Kinross?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Which areas do you work in?
The entire UK, including all of Perth and Kinross. Just include your postcode and we’ll confirm dates.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
The process
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Read more
Landlords, agents and businesses in Kinross
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Kinross use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
What we can’t put right
We will always be straight with you, so here’s what a repair will not do:
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
