Hampshire · England

Bath re-enamelling & resurfacing in Conford, Hampshire

Problem with your bath in Conford? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Conford

Bath re-enamelling at your home in Conford

After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. If you’re dealing with stains that won’t shift and a coloured bath you want in white, we can usually put it right, on cast iron baths, Victorian roll-tops and basins & shower trays alike.

A one-year guarantee comes as standard, so you’re covered after the visit.

Before and after: an old basin refinished to bright white
Where
Conford (GU30)
Region
Hampshire
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.

Why choose Surface Doctor in Conford

  • Dust sheets down, tidy finish
  • Honest advice, even when it means no job
  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted

Read our full price list and guide to resurfacing and replacement costs.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Prices and what affects them

Resurfacing from £350. We price every job individually. The main factors are:

  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • How many areas need work

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Quotes from your pictures

When you take your pictures, a few simple things make all the difference:

  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • A photo taken from further back

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Where we work around Conford

Conford is about 2 miles south-east of Bordon, in Hampshire. Customers in Conford get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover 683 places in Hampshire. Our jobs stretch from Conford to London (about 42 miles away).

All of GU30 is covered. If you’re just outside Conford, we cover Passfield (1 mile north-west), Weavers Down (1 mile south), Liphook (1 mile south-east), Longmoor (2 miles south-west) and Woolmer (2 miles west). Within a short drive, we also cover Farnborough (14 miles north), Fleet (13 miles north), Horndean (15 miles south-west), Aldershot (11 miles north), Alton (8 miles north-west) and Petersfield (8 miles south-west).

Local landmarks in Conford

Around Conford, we work in homes near Liphook Infant School and Bohunt School, among other places. The closest station to Conford is Liphook station, about 1.8 miles south-east of the centre. Other landmarks nearby include Chase Community Hospital (1.9 miles north-west). For a walk, there’s Wheeler's Down and Deadwater Valley.

Map of Conford © OpenStreetMap contributors

FAQs for Conford

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before and we will plan for it.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can a failed resurfacing be redone?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

How soon can you come?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Can you quote from photos?

Nearly always. We only ask to see it in person if the pictures cannot show what we need.

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

When to call us in Conford

Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.

Send us a picture if you notice any of these:

  • A roll-top that’s seen better days
  • Stains that will not shift
  • Chips and rust in more than one place
  • Wear marks under the taps

What to look for in a quote

  • How the colour is matched
  • If travel is included in the price
  • A fixed price, and whether VAT is included
  • How your room will be protected

Our hiring checklist

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow a full day, and we will keep you posted as we go.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Move bottles, mats and clutter away from the area
  • Keep children and pets away from the room on the day

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.

Get a fixed price

Advice

Honest limits

It helps to know what we can’t do too:

  • A bath split right through the body
  • Damage hidden under a previous coating, until it’s stripped back
  • Plumbing leaks, which need a plumber

If in doubt, send pictures and we will say what we think before booking.

Materials we work on in Conford

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.