North Yorkshire · England
Bath Re-enamelling in Little Barugh
Bath re-enamelling in and around Little Barugh: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Bath re-enamelling in Little Barugh without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people contact us are stains that won’t shift and an original cast iron bath that needs restoring.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Little Barugh (YO17)
- Region
- North Yorkshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath re-enamelling in Little Barugh
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Places near Little Barugh
Also in Little Barugh
How to look after the repair
Aftercare is simple:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Have chips seen to early
- Do not use the bath until it has fully cured
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What happens on the day
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Little Barugh and the surrounding area
Little Barugh is about 18 miles west of Scarborough, in North Yorkshire. We travel to clients in Little Barugh and the surrounding area, so you don’t need to take anything anywhere. Our technicians cover all 626 towns and villages across North Yorkshire. Our jobs stretch from Little Barugh to Leeds (40 miles away).
Our technicians cover all of YO17. We also cover the places around Little Barugh: Great Barugh (1 mile south-west), Kirby Misperton (1 mile south-east), Normanby (2 miles north-west), Marton (3 miles north-west) and Middleton (4 miles north-east). Larger places within reach include Malton (5 miles south), Pickering (3 miles north-east), Norton-on-Derwent (6 miles south), Kirkbymoorside (6 miles north-west), Helmsley (9 miles west) and Thornton-le-Dale (5 miles east).
Local landmarks in Little Barugh
Typical jobs here are in homes near The Golden Lion pub and St Laurence's Church, among other places. A little further out are Pickering Castle (3.7 miles north-east) and Beck Isle Museum (3.4 miles north-east).
Repair or replace in Little Barugh?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
See our prices page and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- What kind of damage it is
- How hard the colour is to match
- What the surface is made of
- The size and number of damaged areas
Our prices are the same across the UK, so there is no premium for Little Barugh. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- What it’s made of, if you know
For a price in Little Barugh, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Landlords, agents and businesses in Little Barugh
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For anyone letting property in or around Little Barugh, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Do you need bath re-enamelling in Little Barugh?
Often the bath has just had decades of use, and only the surface is worn. The body of the bath is usually perfectly sound.
The most common problems we are called about are:
- A dull, rough surface that won’t come clean
- Stains that will not shift
- Wear marks under the taps
- A coating lifting around the plughole
What to look for in a quote
- What happens if the damage is worse than the photos show
- How long it needs to cure
- Whether the price is fixed and includes VAT
- How the colour is matched
Honest limits
It helps to know what we cannot do:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Little Barugh
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
