North Yorkshire · England
Bath Re-enamelling for Great Barugh homes
Full bath re-enamelling and resurfacing in Great Barugh, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- Staining under the taps and around the waste
Bath re-enamelling in Great Barugh, done in place
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people get in touch are an old resurfacing that’s failing and several chips and rust patches.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Great Barugh (YO17)
- Region
- North Yorkshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How to care for the repair
After the repair has cured, a few habits help it last:
- Wipe the bath dry after use in hard water areas
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a full day. We clean up when we are done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
How to get a price
Most clients in Great Barugh get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Repair or replace in Great Barugh?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
Read our pricing and bath cost comparison.
Common problems we fix in Great Barugh
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
If you can see any of these, send us a picture:
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
- Chips and rust in more than one place
Questions to ask before you book
- How long it needs to cure
- How changes to the job are handled
- Who turns up on the day
- How to care for the finish
What affects the price in Great Barugh
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- The type of damage
- How hard the colour is to match
- The material and finish
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send pictures for a quote
When you take your pictures, a few simple things make all the difference:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- The material, if you know it
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Our work in Great Barugh
Great Barugh is about 19 miles west of Scarborough, in North Yorkshire. From the centre of Great Barugh to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 626 places in North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 39 miles away.
We cover every part of YO17 and the streets around it. Neighbouring places we cover include Little Barugh (1 mile north-east), Normanby (2 miles north-west), Kirby Misperton (2 miles east), Marton (3 miles north) and Sinnington (4 miles north). We also work in nearby towns such as Malton (5 miles south-east), Pickering (4 miles north-east), Easingwold (15 miles south-west), Norton-on-Derwent (6 miles south-east), Kirkbymoorside (6 miles north-west) and Helmsley (9 miles west).
What’s near Great Barugh
Locally, our jobs take us to homes close to The Golden Lion pub, among other places. Nearby you will also find Malton Hospital (5 miles south-east) and Slingsby Castle (4 miles south-west).
What a repair can’t fix
A repair is not right for every job, including:
- Leaks from fittings rather than the bath
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Towns and villages near Great Barugh
Other services in Great Barugh
Great Barugh: your questions answered
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do the materials smell?
Expect a mild smell while we’re working.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across North Yorkshire.
Can you fix a peeling bath coating?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
About our accreditations · Every repair comes with a one-year guarantee.
