Flintshire · England
Bath Re-enamelling in Llan-eurgain
Bath re-enamelling in Llan-eurgain without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
What we are called out for in Llan-eurgain
Hard water speeds up the wear, and abrasive cleaners do the most damage.
People normally call us after spotting one of these:
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Worn patches where water runs and sits
- Stains that won’t shift
Comparing quotes
- How the colour is matched
- Is the price fixed, and does it include VAT?
- Who will actually do the work
- Aftercare advice
About our bath re-enamelling in Llan-eurgain
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our repair technicians work on pressed steel baths, basins & shower trays and acrylic baths, and common reasons people get in touch are brown or grey marks that don’t clean off and a period or roll-top bath worth keeping.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Llan-eurgain (CH7)
- Area hub
- Flintshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Keep children and pets away from the room on the day
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- What kind of damage it is
- How hard the colour is to match
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Llan-eurgain and nearby
Llan-eurgain (also: Northop) is about 2 miles south of Flint, in Flintshire. From the centre of Llan-eurgain to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Llan-eurgain is one of 139 towns and villages in Flintshire where we work. We work right across the region, from Llan-eurgain to Liverpool (16 miles away).
Every address in CH7 is within our area, from the main roads to the quietest streets. That includes homes on High Street, Church Road and Pilgrims Close and the roads around them. Nearby, we also work in Mynydd y Fflint (1 mile north), Rhosesmor (2 miles west), Oakenholt (2 miles north-east), Berth-ddu (2 miles west) and Flint (2 miles north). Within a short drive, we also cover Connah's Quay (3 miles east), Buckley (3 miles south-east), Bwcle (4 miles south-east), Saltney (9 miles east), Mold (3 miles south) and Holywell (6 miles north-west).
Near you in Llan-eurgain
In Llan-eurgain, that means homes near Salem Chapel, Boot Inn and Ysgol Owen Jones C.P., among other places. The closest station to Llan-eurgain is Flint station, about 2.9 miles north of the centre. A little further out are Castell Rhosesmor (1 mile west) and Mold Community Hospital (2.7 miles south). Green spaces nearby include Coed Uchaf and Deeside Nature Reserve.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Llan-eurgain
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Your questions about bath re-enamelling in Llan-eurgain
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are there extra charges for Llan-eurgain?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
Can you do the outside of a roll-top?
Yes. Inside and out.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How long is the bath unusable?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Do you cover the entire of Flintshire?
Everywhere in the UK, Llan-eurgain included. There’s no extra charge for travel.
Looking after it afterwards
So the finish stays in good condition:
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Have chips seen to early
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlords, agents and businesses in Llan-eurgain
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We work for landlords, letting agents and housing providers in Llan-eurgain as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Towns and villages near Llan-eurgain
Also in Llan-eurgain
Repair or replace: which is better?
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
- Colour mixed on the day to match
- No need to remove anything
Take a look at our full price list and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
