Flintshire · England
Bath Re-enamelling in Mold
Local bath re-enamelling for Mold: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
About our bath re-enamelling in Mold
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Whether it’s staining under the taps and around the waste and an old resurfacing that’s failing, we can help, whatever the material.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Mold (CH7)
- County
- Flintshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Mold
Also in Mold
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- One-year guarantee on every repair
- Work done at your home or business
- One price list for the entire UK
- Most jobs done in one visit
Take a look at our pricing or guide to resurfacing and replacement costs.
About Mold
Mold (also: Yr Wyddgrug) is about 10 miles north-west of Wrexham, in Flintshire. Anywhere in CH7, a technician comes to you. Our repair technicians cover all 139 towns and villages across Flintshire, from the larger towns to small villages. Our nearest city page is Liverpool, about 19 miles away.
All of CH7 is within our area. From Park House Mews, New Street and The Park or anywhere nearby, we can come to you. Mold sits on or near the A494 and A541, so getting to you is simple. Close by, we cover Ponterwyl (1 mile north-east), Pwll-glas (1 mile north-west), Maes-y-dre (1 mile north), Black Brook (1 mile north-west) and Gwernymynydd (1 mile south-west). We also work in nearby towns such as Connah's Quay (5 miles north-east), Bwcle (3 miles east), Flint (5 miles north), Saltney (9 miles east), Holywell (8 miles north-west) and Lache (9 miles east). Mold is among the bigger towns we cover in Flintshire.
What’s near Mold
Locally, our jobs take us to homes close to Ysgol Glanrafon, Bethel Church and Ruthin Castle Hotel and the streets around them. The closest station to Mold is Buckley station, about 3.7 miles east of the centre. Nearby you’ll also find Mold Library and Museum (less than half a mile north) and Tyddyn Mount (1 mile east). Open spaces near Mold include Padeswood Pool and Bailey Hill.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Getting a price
Email us pictures of the damage and one of the whole item, and tell us you are in Mold, and we’ll come back with a fixed quote.
Related advice
Honest limits
Before you book, it’s worth knowing the limits too:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
What affects the price in Mold
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The size and number of damaged areas
A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your pictures
Phone photos are fine. Make sure they show:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
FAQs for Mold
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you repair something that is been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
What happens next?
We come back with a fixed quote, typically with dates to choose from. There’s no obligation to book.
Are there extra charges for Mold?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs right away
- Respect the curing time we give you
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
