Wrexham · Wales
Bath re-enamelling & resurfacing in Llan-y-pwll, Wrexham
Bath re-enamelling for Llan-y-pwll, without a refit. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A coating lifting around the plughole
How we price bath re-enamelling
Prices start from £350. We do not charge extra for travel to Llan-y-pwll. The price depends on:
- How much damage there is
- Where the damage is and how we get to it
- How many items we do on one visit
- The material
The price reflects the work involved, not your postcode. You’ll see the full price before booking.
How to get a fixed price
Phone photos are fine. Make sure they show:
- A coin beside the damage so we can judge size
- One picture of the whole bath
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
If you are in Llan-y-pwll and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our bath re-enamelling in Llan-y-pwll
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s stains that won’t shift and several chips and rust patches, we can typically put it right, whatever the material.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Llan-y-pwll (LL13)
- Area hub
- Wrexham
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Llan-y-pwll and nearby
Llan-y-pwll is about 2 miles east of Wrexham, in Wrexham. Anywhere in LL13, we come to you. Llan-y-pwll is one of 115 places in Wrexham we cover. You can also see our page for Liverpool, about 24 miles away.
All of LL13 is covered. Jobs here include addresses on Hugmore Lane, Wrexham Road and Holt Road. Neighbouring places we cover include Ridleywood (1 mile south-east), Redwither (2 miles south), Rhosnesni (2 miles west), Borras (2 miles west) and Pentre Maelor (2 miles south). Further out, we also cover Offa (3 miles south-west), Rhosllannerchrugog (6 miles south-west), Rhosddu (3 miles west), Gwersyllt (4 miles west), Little Mountain (4 miles west) and Hightown (3 miles south-west).
Near you in Llan-y-pwll
Our customers here include homes close to Rafters Bar@Holt Lodge Hotel and Rhosnesni High School, among other places. The closest station to Llan-y-pwll is Wrexham General station, about 3 miles west of the centre. Nearby you will also find Tŷ Pawb (2.7 miles west) and Trevalyn Manor (2.9 miles north). Green spaces nearby include Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- Don’t use the bath until it has fully cured
- Have chips seen to early
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Nearby places to Llan-y-pwll
Other services in Llan-y-pwll
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
FAQs for Llan-y-pwll
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Do you cover the entire of Wrexham?
Everywhere in the UK, Llan-y-pwll included. Travel is included in the price.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
How durable is a resurfaced bath?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Repairing versus replacing in Llan-y-pwll
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- A fixed quote before you book
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- Everything repaired in place
Take a look at our pricing or bath cost comparison.
When a repair isn’t the answer
To be straight with you, there are a few things a repair will not fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
What we do, step by step
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Make sure the area is dry
Ask for a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
