Renfrewshire · Scotland
Bath Re-enamelling for Lochwinnoch homes
Full bath re-enamelling and resurfacing in Lochwinnoch, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
Bath re-enamelling at your home in Lochwinnoch
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and common reasons people get in touch are stains that won’t shift and an original cast iron bath that needs restoring.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Lochwinnoch (PA12)
- County
- Renfrewshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
A repair isn’t right for every job, including:
- A bath split right through the body
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Places near Lochwinnoch
Other services in Lochwinnoch
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The material
Our prices are the same across the UK, with no extra for Lochwinnoch. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- The material, if you know it
- A picture taken from further back
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Questions from Lochwinnoch
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
Which areas do you work in?
Across the UK, so Lochwinnoch is covered. Our prices are the same everywhere.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Landlord and trade work in Lochwinnoch
Landlords, letting agents and housing providers in Lochwinnoch use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Common problems we fix in Lochwinnoch
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Most people contact us when they notice one of these:
- Enamel that is lost its shine and feels rough
- Stains that won’t shift
- Several chips and rust patches
- A peeling or bubbling previous coating
What to look for in a quote
- What preparation is included
- How the room is protected while they work
- The length of the guarantee and what it covers
- Aftercare advice
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
How it works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes most of the day, and we will keep you posted as we go.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Clear the area around the damage
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs immediately
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Our work in Lochwinnoch
Lochwinnoch is about 5 miles south-west of Johnstone, in Renfrewshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Lochwinnoch is one of 21 places in Renfrewshire where we work. Our jobs stretch from Lochwinnoch to Glasgow (14 miles away).
Every address in PA12 is within our area, from the main roads to the quietest streets. That includes homes on High Street, Main Street and Glenpark Road. We also cover the places around Lochwinnoch: Beith (3 miles south), Gateside (3 miles south), Kilbirnie (4 miles south-west), Longbar (4 miles south) and Glengarnock (4 miles south-west). Within a short drive, we also cover Paisley (8 miles east), Renfrew (11 miles north-east), Johnstone (5 miles north-east), Erskine (10 miles north-east), Bishopton (9 miles north-east) and Glenburn (8 miles east).
What’s near Lochwinnoch
Typical jobs here are in homes near Lochwinnoch, among other places. The closest station to Lochwinnoch is Lochwinnoch station, roughly 0.8 miles south-east. Other landmarks nearby include Merchiston Hospital (5.3 miles north-east) and Lochwinnoch Community Museum (less than half a mile south). For a walk, there is Castle Semple Loch and Walls Hill.
About our accreditations · Every repair comes with a one-year guarantee.
