County Durham · England

Bath Re-enamelling in Long Newton

Our technicians come to Long Newton for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.

  • Resurfacing from £350
  • Stains that won’t shift
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Long Newton

Bath re-enamelling in Long Newton, done in place

We do not move the bath, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, and can be used again the following day. Whether it’s a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, we can help, on cast iron baths, pressed steel baths and acrylic baths alike.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Location
Long Newton (TS21)
County
County Durham
Cover
A year, on every repair
Price
From £350. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Have chips seen to early
  • Respect the curing time we give you
  • Repair dripping taps early
  • Rinse off hair dye, oils and bath bombs straight away

Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.

FAQs for Long Newton

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Will the bath be moved?

No. We resurface it in place, so nothing else is disturbed.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

How much does bath re-enamelling cost in Long Newton?

Prices start from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside if you’d like.

Can you quote from pictures?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.

Why repair rather than replace?

Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there’s no premium for Long Newton. The job itself decides the price: the material, the amount of damage and how many items.

Why Long Newton clients choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Rooms protected and left tidy
  • No need to remove anything
  • Honest advice, even when it means no job

Read our full price list and guide to resurfacing and replacement costs.

Our work in Long Newton

Long Newton is about 4 miles north-west of Yarm, in County Durham. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 329 places across County Durham. We work right across the region, from Long Newton to Newcastle upon Tyne (about 32 miles away).

Jobs in TS21 are booked in the same way as anywhere else. Whether you live on Darlington Road, Burn Wood Court and Rectory Lane or a nearby road, a technician can come to you. If you’re just outside Long Newton, we cover Whinney Hill (2 miles north), Oak Tree (2 miles south-west), Sadberge (3 miles west), Middleton St George (3 miles south-west) and Redmarshall (3 miles north). Larger places within reach include Newton Aycliffe (9 miles north-west), Bishop Auckland (13 miles north-west), Spennymoor (13 miles north-west), Peterlee (15 miles north), Shildon (11 miles north-west) and Ferryhill (11 miles north-west).

Around Long Newton

In Long Newton, that means homes near St Mary's Church of England Primary School and St Mary's Church and the streets around them. For rail, the closest station is Teesside Airport station, about 1.7 miles south of the centre. A little further out are University Hospital of North Tees (3.8 miles north-east) and Sadberge Castle (2.6 miles west).

Map of Long Newton © OpenStreetMap contributors

Work for landlords and builders

We work for landlords, letting agents and housing providers in Long Newton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

When to call us in Long Newton

Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.

The things clients usually mention when they call are:

  • Wear marks under the taps
  • An old resurfacing that’s failing
  • Enamel that’s lost its shine and feels rough
  • Several chips and rust patches

What to look for in a quote

  • How changes to the job are handled
  • Aftercare advice
  • What preparation is included
  • How soon you can use it again

How to compare quotes

What we do, step by step

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we’re done and tell you when it’s ready to use.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Get a free quote

Related advice

What bath re-enamelling costs

Prices start from £350. Each job gets its own fixed price. These are the things that affect it:

  • The size and number of damaged areas
  • The material and finish
  • How hard the colour is to match
  • Any earlier repairs that need removing first

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Getting a price from pictures

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • A wider photo showing the entire bath
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • A bath split right through the body
  • Acrylic that moves when you stand in it
  • Steel that has corroded right through

Send us pictures and we will tell you honestly.

What we work on

  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.