Doncaster · England
Bath Re-enamelling in Loversall
Bath re-enamelling in Loversall without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Stains that will not shift
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Loversall without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair basins & shower trays, acrylic baths and Victorian roll-tops, and people most often call us about a bath in a colour that no longer suits and staining under the taps and around the waste.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Loversall (DN11)
- County
- Doncaster
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Places near Loversall
More services for Loversall
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Fixed prices from your pictures
- One price list for the whole UK
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or guide to resurfacing and replacement costs.
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details.
If you manage property in Loversall, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
When to call us in Loversall
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Common reasons people in Loversall contact us include:
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Wear marks under the taps
What your quote should include
- Who turns up on the day
- Whether cleaning and preparation are in the price
- When it can be used again
- Whether they match the colour on site
Questions from Loversall
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
What areas do you cover?
Everywhere in the UK, Loversall included. Travel is included in the price.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we’ll plan for it.
How do I get a price for bath re-enamelling in Loversall?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your DN11 postcode.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you cover Loversall?
Yes. We work across the UK and travel to Loversall and the rest of Doncaster. Send us photos for a fixed quote, or call 0345 017 0787.
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- How hard the colour is to match
- The material
- Doing more than one item at once
- The size and number of damaged areas
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- Something in shot to show the size
- One picture of the whole bath
- The material, if you know it
- Natural light rather than flash
Upload pictures of the damage and one of the entire item, and tell us you’re in Loversall, and we’ll come back with a fixed quote.
Our work in Loversall
Loversall is about 3 miles south-west of Doncaster, in Doncaster. Whether you are in the middle of Loversall or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 89 places across Doncaster. You can also see our page for Leeds, about 28 miles away.
Postcode districts we cover here: DN11. Neighbouring places we cover include Wadworth (1 mile south), Wilsic (2 miles south), New Edlington (2 miles west), Warmsworth (2 miles north-west) and Old Edlington (3 miles west). Within a short drive, we also cover Doncaster (3 miles north-east), Adwick le Street (7 miles north), Thorne (12 miles north-east), Conisbrough (4 miles west), Bentley (4 miles north) and Armthorpe (5 miles north-east).
What’s near Loversall
Around Loversall, we work in homes near Carr Lodge Academy, Potteric Carr and Astrea Academy Woodfields and the streets around them. The nearest railway station is Doncaster station, roughly 2.8 miles north of the centre. Nearby you will also find Ashworth Barracks Museum (1.7 miles north-west) and Frenchgate Centre (2.9 miles north). Open spaces near Loversall include Potteric Carr Nature Reserve.
What a repair can’t fix
A repair isn’t right for every job, for example:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
How it works
We work cleanly and quietly. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to look after it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Point us to the nearest place to park
- Let us know which floor the room is on
- Ensure the area is dry
How to get a price
To get a price, send two or three pictures using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
