Doncaster · England
Bath Re-enamelling in Wilsic
Full bath re-enamelling and resurfacing in Wilsic, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
Bath re-enamelling in Wilsic, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. We work on basins & shower trays, acrylic baths and cast iron baths, and people most often call us about worn patches where water runs and sits and an original cast iron bath that needs restoring.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Area
- Wilsic (DN11)
- Area hub
- Doncaster
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Wilsic use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Nearby places to Wilsic
More services for Wilsic
Repairing versus replacing in Wilsic
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Wilsic clients choose us
- One price list for the whole UK
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- One-year guarantee on every repair
Take a look at our full price list or guide to resurfacing and replacement costs.
Wilsic and the surrounding area
Wilsic is about 3 miles north-east of Maltby, in Doncaster. From the centre of Wilsic to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Wilsic is one of 89 places in Doncaster we cover. You can also see our page for Leeds, about 29 miles away.
Every address in DN11 is within our area. You’ll find streets such as Wilsic Lane and Wilsic Road, and we cover them all. Close by, we cover Wadworth (1 mile north), Stainton (2 miles south-west), Loversall (2 miles north), Tickhill (2 miles south-east) and Old Edlington (2 miles north-west). We also work in nearby towns such as Doncaster (4 miles north), Adwick le Street (8 miles north), Thorne (13 miles north-east), Conisbrough (4 miles north-west), Bentley (6 miles north) and Armthorpe (7 miles north-east).
Landmarks near Wilsic
We visit homes around Sir Thomas Wharton Academy, Church of St John the Baptist and Wadworth Primary School and the streets around them. Wilsic’s nearest station is Conisbrough station, about 4.3 miles north-west of the centre. Further afield, we also cover the area around St Catherine's Hospital (2.6 miles north) and Ashworth Barracks Museum (3 miles north). Not far away are Potteric Carr Nature Reserve.
When we’d advise against a repair
We won’t take on work that won’t last, so these are the limits:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Signs you need bath re-enamelling in Wilsic
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Comparing quotes
- What protection goes down before work starts
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- How changes to the job are handled
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It generally takes most of the day, and you’re welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- The type of damage
- The colour and finish to match
- How many items we do on one visit
- How easy the damage is to reach
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- The material, if you know it
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Your questions about bath re-enamelling in Wilsic
Are there extra charges for Wilsic?
Travel is included in the price, with the same prices everywhere we work.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Do you work in Wilsic?
We do. We send a technician to Wilsic for every job, and the price is the same as everywhere else.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, plus dates. There’s no obligation to book.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
