Lancashire · England
Bath Re-enamelling for Low Bentham homes
Bath re-enamelling for Low Bentham, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs immediately
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Bath re-enamelling in Low Bentham without replacing anything
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Common call-outs are for several chips and rust patches and a bath that stays dull however much you clean it, across basins & shower trays, acrylic baths and Victorian roll-tops.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Low Bentham (LA2)
- Area hub
- Lancashire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Low Bentham
More services for Low Bentham
When to call us in Low Bentham
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Customers normally contact us about:
- A roll-top that is seen better days
- Staining under the taps and around the waste
- A coating lifting around the plughole
- Worn patches where water runs and sits
Comparing quotes
- What the guarantee covers, and for how long
- If travel is included in the price
- How the room is protected while they work
- Whether they match the colour on site
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Low Bentham
We work for landlords, letting agents and housing providers in Low Bentham as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Common questions in Low Bentham
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed price without visiting.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you cover the entire of Lancashire?
All of Lancashire, and the rest of the UK. Travel is included in the price.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there’s more, we will tell you before starting.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
What you get with us
- We will tell you if it’s not worth repairing
- Rooms protected and left tidy
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
See our prices page and resurfacing vs replacement cost guide.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to the best part of a day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
How to get a price
Upload photos of the damage and one of the whole item, with your LA2 postcode, and we will come back with a fixed quote.
Advice
What we can’t put right
A repair is not always the answer, and we’d rather say so up front. We can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Steel that has corroded right through
If in doubt, send photos and we will say what we think.
Materials we work on in Low Bentham
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Low Bentham and the surrounding area
Low Bentham is about 12 miles north-east of Lancaster, in Lancashire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Low Bentham is one of 482 towns and villages in Lancashire we cover. We work right across the region, from Low Bentham to Manchester (46 miles away).
Here we cover the LA2 postcode area. Local streets include Main Street, Old School Close and Hillside Road, and we cover them all. We also cover the places around Low Bentham: High Bentham (1 mile east), Green (1 mile south-west), Burton in Lonsdale (2 miles north), Wennington (2 miles west) and Wrayton (3 miles north-west). Further out, we also cover Lancaster (12 miles south-west), Morecambe (13 miles west), Heysham (15 miles west), Westfield War Memorial Village (12 miles south-west), Sandylands (15 miles west) and Carnforth (9 miles west).
Near you in Low Bentham
In Low Bentham, that means homes near Bentham Community Primary School, Church of St John the Baptist and Sun Dial Inn, among other places. Low Bentham’s nearest station is Bentham station, about 1.1 miles east of the centre. Well-known places in the area include Thurland Castle (3.3 miles north-west). Green spaces nearby include Constitutional.
About our accreditations · Every repair comes with a one-year guarantee.
