Hampshire · England
Bath Re-enamelling in Lower Froyle
Bath re-enamelling in Lower Froyle without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Staining under the taps and around the waste
Repair or replace in Lower Froyle?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- One price list for the whole UK
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- Most jobs done in one visit
Read our prices page or bath cost comparison.
About our bath re-enamelling in Lower Froyle
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include enamel that’s lost its shine and feels rough and a peeling or bubbling previous coating, in pressed steel baths, cast iron baths and acrylic baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Lower Froyle (GU34)
- Region
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Landlords, letting agents and housing providers in Lower Froyle use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Where we work around Lower Froyle
Lower Froyle is about 4 miles north-east of Alton, in Hampshire. Jobs in Lower Froyle are booked in like any other job: a fixed price from your photos, then a visit to do the work. Lower Froyle is one of 683 towns and villages in Hampshire where we work. We work right across the region, from Lower Froyle to London (about 41 miles away).
We cover every part of GU34 and the streets around it. Jobs here include addresses on Westburn Fields, Barnfield Close and Hussey's Lane and the roads around them. Nearby, we also work in Froyle (1 mile south-west), Upper Froyle (1 mile south-west), Neatham (2 miles south-west), Holybourne (2 miles south-west) and Wyck (3 miles south). Further out, we also cover Basingstoke (10 miles north-west), Farnborough (10 miles north-east), Fleet (7 miles north-east), Aldershot (8 miles north-east), Alton (4 miles south-west) and Petersfield (13 miles south).
What’s near Lower Froyle
Locally, our jobs take us to homes close to Church of St Mary of the Assumption, among other places. For rail, the closest station is Bentley (Hampshire) station, roughly 2 miles east of the centre. Well-known places in the area include Barley Pound (2.8 miles north-east) and Alton Community Hospital (4.8 miles south-west). For a walk, there is Dogmersfield Lake and Holybourne Hill.
Your questions about bath re-enamelling in Lower Froyle
How do I book?
Send photos through the quote form or call 0345 017 0787.
Do you come to Lower Froyle?
Yes, we do. We send a technician to Lower Froyle for every job, and the price is the same as everywhere else.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Which areas do you work in?
We work UK-wide. Prices do not change with location.
Common problems we fix in Lower Froyle
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, normally first under the taps and around the waste.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- Lots of chips and rust spots
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- How the colour is matched
- What happens if they find more damage
- How the room is protected while they work
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How many items we do on one visit
- The material
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- The material, if you know it
Upload a photo of the damage and one of the whole item, and tell us you’re in Lower Froyle, and we will come back with a fixed quote.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Towns and villages near Lower Froyle
Also in Lower Froyle
Looking after it afterwards
Once the work has cured, treat it gently:
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes most of the day, and we’ll tell you if anything changes.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Clear the area around the damage
- Let the surface dry out before the visit
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
