Pembrokeshire · Wales
Bath Re-enamelling for Lower Solva homes
Full bath re-enamelling and resurfacing at your home in Lower Solva, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- Lots of chips and rust spots
Bath re-enamelling in Lower Solva without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a bath that stays dull however much you clean it and staining under the taps and around the waste, in basins & shower trays, acrylic baths and cast iron baths.
We stand behind the work with a one-year guarantee.
- Area
- Lower Solva (SA62)
- Region
- Pembrokeshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How easy the damage is to reach
- Whether we combine several jobs
- Any earlier repairs that need removing first
- What kind of damage it is
The price reflects the work involved, not where you live. You will see the full price before booking.
Quotes from your pictures
Two or three clear pictures are generally enough. It helps if you send:
- Any details about the material
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- One picture of the whole bath
Send us a photo of the damage and one of the whole item, with your SA62 postcode, and we will reply with a fixed price.
Lower Solva: your questions answered
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
What areas do you cover?
The whole UK, including all of Pembrokeshire. Just include your postcode and we’ll confirm dates.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Signs you need bath re-enamelling in Lower Solva
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
People normally call us when they notice one of these:
- A dull, rough surface that will not come clean
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
What to look for in a quote
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- How the colour is matched
Looking after it afterwards
How the surface is treated afterwards matters:
- Do not use the bath until it has fully cured
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Lower Solva and nearby
Lower Solva is about 11 miles north-west of Haverfordwest, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 223 places in Pembrokeshire.
All of SA62 is within our area, from the main roads to the quietest streets. From Fort Road, High Street and Panteg Road or anywhere nearby, a technician can come to you. Other places close to Lower Solva include Solva (1 mile south-west), St Elvis (1 mile south-east), Solfach (1 mile west), Middle Mill (1 mile north) and Brawdy (2 miles east). We also work in nearby towns such as Haverfordwest (11 miles south-east), Milford Haven (13 miles south-east), The Marsh (11 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (13 miles south-east).
Landmarks near Lower Solva
We visit homes around The Cambrian Inn and Church of St Teilo. Other landmarks nearby include Whitewell (3.5 miles west) and Y Castell (0.6 miles north). For a walk, there’s Gewni.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Should you replace it?
A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. We charge the same wherever you are, so there is no premium for Lower Solva. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Lower Solva
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
See our pricing or guide to resurfacing and replacement costs.
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Before we arrive
- Have a window or extractor fan available
- Clear the area around the damage
- Let us know about parking or access
Getting a price
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
What we cannot put right
Some jobs are not right for a repair, including:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Towns and villages near Lower Solva
Also in Lower Solva
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
