Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Middle Mill, Pembrokeshire
Fixed-price bath re-enamelling in Middle Mill and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
Work for landlords and builders
For anyone letting property in or around Middle Mill, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Pembrokeshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our bath re-enamelling in Middle Mill
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our technicians work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are a peeling or bubbling previous coating and a dull, rough surface that won’t come clean.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Middle Mill (SA62)
- Region
- Pembrokeshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Middle Mill?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why Middle Mill customers choose us
- Repair technicians who travel to you, UK-wide
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Everything repaired in place
Take a look at our full price list and guide to resurfacing and replacement costs.
The process
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Let us know about parking or access
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will say straight away whether it can be repaired.
Related advice
Middle Mill questions
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Are there extra charges for Middle Mill?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Pembrokeshire.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Do you work in Middle Mill?
Yes. We cover the whole UK and come to Middle Mill. Send us pictures for a fixed quote, or call 0345 017 0787.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Do you need bath re-enamelling in Middle Mill?
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
These are the problems we are asked about most:
- A coating lifting around the plughole
- Chips and rust in more than one place
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- Whether the price is fixed and includes VAT
- What preparation is included
- Whether a trained technician does the job
- If travel is included in the price
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How hard the colour is to match
- The type of damage
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
Send us pictures of the damage and a wider shot of the entire item, with your SA62 postcode, and we will come back with a fixed quote.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us photos and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Middle Mill and nearby
Middle Mill (Welsh: Felinganol) is about 11 miles north-west of Haverfordwest, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Middle Mill is one of 223 towns and villages in Pembrokeshire where we work.
Our visits in SA62 work the same way as everywhere else we cover. Other places close to Middle Mill include Lower Solva (1 mile south), Solva (1 mile south), Solfach (1 mile south), St Elvis (1 mile south) and Brawdy (3 miles east). Further out, we also cover Haverfordwest (11 miles south-east), Milford Haven (14 miles south-east), The Marsh (11 miles south-east), Fishguard (12 miles north-east), Goodwick (12 miles north-east) and Pill (14 miles south-east).
Local landmarks in Middle Mill
Typical jobs here are in homes near The Cambrian Inn and Church of St.David and the streets around them. Further afield, we also cover the area around Y Castell (less than half a mile south-west) and Whitewell (3.4 miles west). The countryside around Middle Mill includes Gewni.
Places near Middle Mill
Also in Middle Mill
About our accreditations · Every repair comes with a one-year guarantee.
