Isle of Wight · England
Bath Re-enamelling for Luccombe Village homes
Local bath re-enamelling for Luccombe Village: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Bath re-enamelling at your home in Luccombe Village
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s an old resurfacing that’s failing and brown or grey marks that don’t clean off, we can help.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Luccombe Village (PO37)
- County
- Isle of Wight
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Luccombe Village
What else we do in Luccombe Village
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the entire surface with the bath left where it is. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- One-year guarantee on every repair
- We’ll tell you if it’s not worth repairing
- One visit for most repairs
- CHAS and Constructionline accredited
See our full price list and resurfacing vs replacement cost guide.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Clear the area around the damage
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Read more
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
When to call us in Luccombe Village
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
The things customers generally mention when they call are:
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Questions to ask before you book
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- Who will actually do the work
- Whether there are any call-out or travel charges
How to care for the repair
To keep it looking its best:
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Questions from Luccombe Village
How do I get a price for bath re-enamelling in Luccombe Village?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item with your PO37 postcode.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What areas do you cover?
Everywhere in the UK, Luccombe Village included. Travel is included in the price.
Covering Luccombe Village
Luccombe Village is about 7 miles south of Ryde, in Isle of Wight. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Luccombe Village is one of 125 towns and villages in Isle of Wight we cover. Our jobs stretch from Luccombe Village to London (about 77 miles away).
Here we cover the PO37 postcode area. Whether you live on The Highway, Maythorne Way and Ash Grove or a nearby road, we can come to you. Neighbouring places we cover include Shanklin (1 mile north), Lake (2 miles north), Sandown (3 miles north), Queen's Bower (3 miles north) and Skinner's Hill (3 miles north). Further out, we also cover Newport (8 miles north-west), Ryde (7 miles north), Cowes (11 miles north-west), East Cowes (11 miles north-west), Oakfield (7 miles north) and Barton (8 miles north-west). Some remote addresses need extra planning, so call us to arrange it.
Local landmarks in Luccombe Village
In Luccombe Village, that means homes near King Harry's Bar, St Blasius Church and St Blasius Shanklin CofE Primary Academy. Luccombe Village’s nearest station is Shanklin station, about 1.2 miles north of the centre. Other landmarks nearby include Sandown Castle (3.1 miles north-east) and Rylstone Manor (0.7 miles north). Green spaces nearby include Alverstone Mead and St Boniface Down.
- Other local spots include South Wight (1.5 miles south-west)
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Luccombe Village. What changes the price is:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Where you are, by postcode
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
