Herefordshire · England

Bath re-enamelling & resurfacing in Marden, Herefordshire

Bath re-enamelling in Marden without the cost of replacing. Get a fixed quote from your photos, then we come to you.

  • Resurfacing from £350
  • Wear marks under the taps
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Marden?

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Avoid suction-cup mats
  • Don’t let dyes or oils sit on the finish
  • Don’t leave bottles, razors or sponges standing on the surface
  • Leave the bath for the full curing time before using it

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Bath re-enamelling at your home in Marden

Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We are often asked to fix a roll-top that’s seen better days and an old resurfacing that’s failing, in basins & shower trays, cast iron baths and Victorian roll-tops.

All our work is covered by our one-year guarantee, wherever you are in Herefordshire.

Area
Marden (HR1)
Region
Herefordshire
Guarantee
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Landlords, agents and businesses in Marden

Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

For anyone letting property in or around Marden, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.

Repair or replace in Marden?

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Marden. What changes the price is the job itself: the material, the amount of damage and how many items.

Why book with us

  • A fixed quote before booking
  • No need to remove anything
  • One price list for the entire UK
  • Colour mixed on the day to match

See our full price list and resurfacing vs replacement cost guide.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What affects the price in Marden

Resurfacing from £350. Prices are worked out job by job, from your photos. The main factors are:

  • The material and finish
  • The colour and finish to match
  • Whether we combine several jobs
  • Access to the area

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • One picture of the entire bath
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • One sharp close-up of the damage

To get a price, send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.

Honest limits

A repair is not right for every job, for example:

  • An acrylic bath that flexes badly underfoot
  • Damage hidden under a previous coating, until it’s stripped back
  • A metal bath with a through crack

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Marden

  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths

Marden and nearby

Marden is about 5 miles north of Hereford, in Herefordshire. Across the HR1 area, a technician comes to you. Marden is one of 255 towns and villages in Herefordshire where we work. You can also see our page for Birmingham, about 42 miles away.

We cover every part of HR1. That includes homes on Little Paradise, Orchard Green and Laystone Green and the roads around them. Close by, we cover Sutton St Michael (1 mile south), Sutton St Nicholas (2 miles south-east), Moreton on Lugg (2 miles south-west), Auberrow (2 miles west) and Preston Wynne (2 miles south-east). Further out, we also cover Hereford (5 miles south), Ross-on-Wye (15 miles south), Ledbury (13 miles south-east), Leominster (7 miles north), Redhill (6 miles south) and Newton Farm (6 miles south).

Landmarks near Marden

We visit homes around Church of St Mary and Marden Primary Academy, among other places. The nearest railway station is Hereford station, about 4.5 miles south of the centre. Nearby you’ll also find Dinmore Preceptory (2.7 miles north-west) and St. Mary's Hospital (3.7 miles south-west). The countryside around Marden includes Dinmore Hill and Lugg Meadow.

Map of Marden © OpenStreetMap contributors

Questions from Marden

Will the bath be moved?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

What happens if you find more damage?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can you make a coloured bath white?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

How do I book?

Just photos, your postcode and a contact number. On the day, access to the room.

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

The process

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. You can expect it to take a full day, and we’ll tell you if anything changes.

  1. First we protect the bathroom and set up ventilation.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the day after, the bath is ready.

Getting ready for the visit

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Make sure the room can be ventilated

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Get a free quote

Advice

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.