Wiltshire · England
Bath re-enamelling & resurfacing in Marston, Wiltshire
Local bath re-enamelling for Marston: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Stains that won’t shift
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for most of the day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
How to prepare
- Tell us if there are stairs or a lift
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Read more
How we handle bath re-enamelling in Marston
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people contact us are worn patches where water runs and sits and several chips and rust patches.
Every repair is covered by our one-year guarantee, wherever you are in Wiltshire.
- Where
- Marston (SN10)
- County
- Wiltshire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When to call us in Marston
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- A coating lifting around the plughole
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
Questions to ask before booking
- How soon you can use it again
- What aftercare is recommended
- What happens if they find more damage
- How the room is protected while they work
Marston: your questions answered
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you come to Marston?
Yes. We work across the UK and travel to Marston. Send us pictures for a fixed quote, or call 0345 017 0787.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What affects the price in Marston
Resurfacing from £350. You will know the full cost before you book. We take into account:
- The colour and finish to match
- What the surface is made of
- How many items we do on one visit
- The type of damage
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
You can take the pictures on your phone. Ensure they show:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Natural light rather than flash
- Where you are, by postcode
The quickest way to a price is to send two or three photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Repair or replace in Marston?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Same prices wherever you are
- No need to remove anything
- Colours mixed by hand to suit your surface
- We leave the room as we found it
Take a look at our prices page and guide to resurfacing and replacement costs.
About Marston
Marston is about 4 miles south-west of Devizes, in Wiltshire. We travel to clients in Marston, so nothing has to leave your home. Marston is one of 425 towns and villages in Wiltshire we cover. We work right across the region, from Marston to Birmingham (80 miles away).
Our visits in SN10 are booked in the same way as anywhere else. Local streets include Close Lane, Norney Road and Plough Lane, all of which we cover. We also travel to Worton (1 mile north-east), Townsend (1 mile north), Bulkington (2 miles north-west), Potterne Wick (2 miles east) and Poulshot (2 miles north). Larger places within reach include Trowbridge (7 miles west), Chippenham (11 miles north), Calne (9 miles north), Devizes (4 miles north-east), Westbury (7 miles south-west) and Melksham (6 miles north-west).
Landmarks near Marston
Our clients here include homes close to Christ Church, Erlestoke Park and The Plough pub, among other places. Well-known places in the area include Devizes Castle (3.5 miles north-east) and Devizes Community Hospital (3.9 miles north-east). Open spaces near Marston include West Lavington Down.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Towns and villages near Marston
Other services in Marston
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
