Wiltshire · England
Bath Re-enamelling in Potterne
Full bath re-enamelling and resurfacing for homes and businesses in Potterne and across Wiltshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A coloured bath you want in white
- Chips and rust in more than one place
Bath re-enamelling in Potterne without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s enamel that’s lost its shine and feels rough and lots of chips and rust spots, we can normally put it right, whatever the material.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Potterne (SN10)
- Region
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Potterne
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.
Keep an eye out for these signs:
- Wear marks under the taps
- A coating lifting around the plughole
- Chips and rust in more than one place
- A coloured bath you want in white
Comparing quotes
- Whether they match the colour on site
- What aftercare is recommended
- How the room is protected while they work
- If travel is included in the price
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Landlords, agents and businesses in Potterne
We work for landlords, letting agents and housing providers in Potterne as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Potterne, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
More services for Potterne
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Getting a price
If you are in Potterne and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Honest limits
In fairness, there are a few things a repair won’t fix:
- Steel that has corroded right through
- A bath split right through the body
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
FAQs for Potterne
Which areas do you work in?
The entire UK, including all of Wiltshire. Send your postcode with your photos and we will offer you dates.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your photos. What matters most is:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- The colour and finish to match
The price reflects the work involved, not where you live. The full price is agreed before you book.
Quotes from your photos
You can take the photos on your phone. Make sure they show:
- Your postcode, so we can check dates
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Where we work around Potterne
Potterne is about 2 miles south-west of Devizes, in Wiltshire. Clients in Potterne get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Potterne is one of 425 places in Wiltshire we cover. Our jobs stretch from Potterne to Birmingham (about 79 miles away).
Here we cover the SN10 postcode area. That includes homes on High Street, The Butts and Highlands. If you’re just outside Potterne, we cover Potterne Wick (1 mile south), Worton (1 mile south-west), Poulshot (2 miles north-west), Townsend (2 miles west) and Marston (2 miles south-west). Further out, we also cover Trowbridge (9 miles west), Chippenham (10 miles north-west), Calne (8 miles north), Westbury (9 miles south-west), Melksham (6 miles north-west) and Warminster (12 miles south-west).
What’s near Potterne
Typical jobs here are in homes near Church of St Mary, Five Lanes Primary School and Devizes School, among other places. Further afield, we also cover the area around Wiltshire Fire Defence And Brigades Museum (0.5 miles south-west) and Devizes Castle (1.7 miles north). For a walk, there is King's Play Hill.
- Local facilities include Kennet (1.8 miles north)
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Leave the bath for the full curing time before using it
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
