Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Mathri, Pembrokeshire
Full bath re-enamelling and resurfacing in Mathri, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
Mathri: your questions answered
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Bath re-enamelling in Mathri, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We’re often asked to fix chips and rust in more than one place and enamel that’s lost its shine and feels rough, in acrylic baths, pressed steel baths and Victorian roll-tops.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Where
- Mathri (SA62)
- County
- Pembrokeshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
About Mathri
Mathri (Welsh: Mathry) is about 11 miles north-west of Haverfordwest, in Pembrokeshire. Whether you are in the middle of Mathri or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Mathri is one of 223 towns and villages in Pembrokeshire we cover.
All of SA62 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Mathry Hill, Parc yr Odyn and Brynhedydd. We also travel to Mathry (1 mile north), Casmorys (1 mile east), Y Sgwâr (2 miles west), Penparc (2 miles west) and Trefin (3 miles west). Larger places within reach include Haverfordwest (11 miles south-east), The Marsh (11 miles south-east), Fishguard (6 miles north-east), Goodwick (6 miles north-east), Fishguard and Goodwick (6 miles north-east) and Penyraber (6 miles north-east).
Landmarks near Mathri
Locally, our jobs take us to homes close to Church of The Holy Martyrs and Farmers Arms and the streets around them. Well-known places in the area include Parc yr Hen Gastell (0.9 miles south-east). For a walk, there’s Mathry Hill and Mathry Road sand pit.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Why us?
- Fixed prices from your photos
- One price list for the whole UK
- Honest advice, even when it means no job
- We leave the room as we found it
Take a look at our full price list or guide to resurfacing and replacement costs.
For landlords and businesses
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Nearby places to Mathri
Also in Mathri
Aftercare tips
Nothing complicated is needed:
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs immediately
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Access to the area
- The material and finish
- How many areas need work
- The colour and finish to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- A wider photo showing the entire bath
- Something in shot to show the size
- Your postcode, so we can check dates
- Any details about the material
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common problems we fix in Mathri
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
The most common problems we’re called about are:
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- Stains that will not shift
- A coating lifting around the plughole
Comparing quotes
- Who turns up on the day
- How soon you can use it again
- Whether the price covers travel
- How changes to the job are handled
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What happens on the day
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. It normally takes the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
