Pembrokeshire · Wales

Bath re-enamelling & resurfacing in Treffynnon, Pembrokeshire

Bath re-enamelling for Treffynnon, without a refit. Get a fixed price from your photos, then book a visit.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Treffynnon

Aftercare tips

Simple care helps the repair last. We recommend:

  • A quick wipe after use keeps limescale away
  • Respect the curing time we give you
  • Keep toiletries on a shelf rather than in the bath
  • Use washing-up liquid and a soft cloth

A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

Bath re-enamelling at your home in Treffynnon

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. We work on pressed steel baths, acrylic baths and cast iron baths, and the jobs we see most are stains that won’t shift and a peeling or bubbling previous coating.

Whatever the size of the job, it’s backed by a one-year guarantee.

Area
Treffynnon (SA62)
Region
Pembrokeshire
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

For landlords and businesses

For anyone letting property in or around Treffynnon, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Leaking taps or wastes (a plumber’s job)
  • Holes rusted through the metal
  • Anything hidden under an old coating, until we remove it

Send us photos and we’ll tell you honestly.

Materials we work on in Treffynnon

  • Cast iron baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

Treffynnon and nearby

Treffynnon is about 10 miles north-west of Haverfordwest, in Pembrokeshire. Jobs in Treffynnon are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Treffynnon is one of 223 places in Pembrokeshire we cover.

Our visits in SA62 are booked in the same way as anywhere else. Other places close to Treffynnon include Penparc (2 miles north), Y Sgwâr (2 miles north), Croes-goch (2 miles north-west), Llanrhian (2 miles north-west) and Trefin (2 miles north). Further out, we also cover Haverfordwest (10 miles south-east), Milford Haven (14 miles south), The Marsh (10 miles south-east), Fishguard (8 miles north-east), Goodwick (8 miles north-east) and Pill (15 miles south).

Around Treffynnon

We visit homes around Church of St Rheithen. A little further out are Castle Villa (2.1 miles east). Not far away are Mathry Hill and Mathry Road sand pit.

Map of Treffynnon © OpenStreetMap contributors

Your questions about bath re-enamelling in Treffynnon

Do you cover Treffynnon?

We do. Repair technicians travel to Treffynnon from across the region, with no extra charge for travel.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

How long is the bath unusable?

Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is there a smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

What happens on the day

Here’s how a visit generally runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow most of the day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Move bottles, mats and clutter away from the area
  • Mention if the room is upstairs or in a flat

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Get a fixed price

Related advice

Do you need bath re-enamelling in Treffynnon?

A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.

If you can see any of these, send us a photo:

  • A coating lifting around the plughole
  • Thin, worn enamel in places
  • Stains that will not shift
  • Several chips and rust patches

What to look for in a quote

  • What happens if the damage is worse than the photos show
  • How the room is protected while they work
  • What aftercare is recommended
  • Whether a trained technician does the job

10 questions to ask before booking

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

How we price bath re-enamelling

Resurfacing from £350. We charge the same across the UK, including Treffynnon. What changes the price is:

  • Whether it’s a chip, crack, burn or wear
  • Any earlier repairs that need removing first
  • How hard the colour is to match
  • Doing more than one item at once

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.

How to get a fixed price

Almost every job we do is priced from pictures. This is what we need:

  • One sharp close-up of the damage
  • Your postcode, so we can check dates
  • Any details about the material
  • Natural light rather than flash

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.