Pembrokeshire · Wales
Bath Re-enamelling in Trefin
Bath re-enamelling in and around Trefin: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Bath re-enamelling in Trefin, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re frequently asked to fix lots of chips and rust spots and a bath in a colour that no longer suits, across acrylic baths, basins & shower trays and cast iron baths.
Big or small, you get the same one-year guarantee.
- Where
- Trefin (SA62)
- County
- Pembrokeshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Trefin
Trefin (Welsh: Trevine) is about 13 miles north-west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Trefin is one of 223 places in Pembrokeshire we cover.
We cover every part of SA62. Jobs here include addresses on Cranog Close, North End and Ffordd Abercastell and the roads around them. Other places close to Trefin include Penparc (1 mile south-east), Y Sgwâr (1 mile south-east), Llanrhian (1 mile south-west), Porthgain (2 miles west) and Croes-goch (2 miles south-west). Within a short drive, we also cover Haverfordwest (13 miles south-east), The Marsh (13 miles south-east), Fishguard (8 miles north-east), Goodwick (7 miles north-east), Fishguard and Goodwick (8 miles east) and Penyraber (8 miles north-east).
Near you in Trefin
Around Trefin, we work in homes near Elim Capel Bach and The Ship Inn. Nearby you’ll also find Parc yr Hen Gastell (3.2 miles east). The countryside around Trefin includes Ynys Deullyn S Island.
When to call us in Trefin
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
People generally call us after spotting one of these:
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
- Chips and rust in more than one place
Comparing quotes
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
How the visit works
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Related advice
Questions from Trefin
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Is there any odour?
There may be a mild smell during the work.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Trefin. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- A year’s guarantee on all work
- One visit for most repairs
- No need to remove anything
- We leave the room as we found it
Take a look at our pricing or resurfacing vs replacement cost guide.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Also in Trefin
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Landlords, agents and businesses in Trefin
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
