Cornwall · England
Bath re-enamelling & resurfacing in Mawgan, Cornwall
Full bath re-enamelling and resurfacing for homes and businesses in Mawgan and across Cornwall. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
Bath re-enamelling in Mawgan, done in place
We don’t move the bath, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the next day. Whether it’s lots of chips and rust spots and a coloured bath you want in white, we can help.
All our work is covered by our one-year guarantee, wherever you are in Cornwall.
- Location
- Mawgan (TR12)
- Region
- Cornwall
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Mawgan
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Do you come to Mawgan?
Yes, we do. We send a technician to Mawgan for every job, and the price is the same as everywhere else.
Where we work around Mawgan
Mawgan is about 3 miles south-east of Helston, in Cornwall. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover 644 places across Cornwall.
Here we cover the TR12 postcode area. We regularly work on streets such as Lower Lane, Higher Lane and Langweath Lane and the roads around them. We also travel to Garras (1 mile south), Gweek (1 mile north), Cross Lanes (2 miles south), White Cross (2 miles south-west) and Cury (3 miles south-west). Within a short drive, we also cover Truro (15 miles north-east), Falmouth (8 miles north-east), Camborne (10 miles north), Redruth (11 miles north), Penzance (15 miles west) and Helston (3 miles north-west).
What’s near Mawgan
In Mawgan, that means homes near Church of Saint Maugan and Garras Community Primary School and the streets around them. A little further out are Helston Community Hospital (2.7 miles west) and Constantine Museum and Archive (3.2 miles north-east). The countryside around Mawgan includes Goonhilly Downs and The Loe.
What affects the price in Mawgan
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- The material and finish
- What kind of damage it is
- Access to the area
- How many items we do on one visit
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
Before you send photos, these tips help us give you a firm price:
- Any details about the material
- One picture of the entire bath
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Let us know about parking or access
- Have a window or extractor fan available
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
What we are called out for in Mawgan
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Typical reasons for a call-out include:
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
What to look for in a quote
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- How the room is protected while they work
- How soon you can use it again
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What a repair can’t fix
We would rather lose a job than do one that will not last, so these are the limits:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Also near Mawgan
More services for Mawgan
About our accreditations · Every repair comes with a one-year guarantee.
